topic Re: my Ruckus AP 510 not getting powered on in RUCKUS Support for Lennar Homes

my Ruckus AP 510 not getting powered on

jignesh43 — Mon, 19 Jun 2023 20:05:09 GMT

Hi,

We changed service provider from xfinity to AT&T and after that our Ruckus is working but Ruckus AP 510 (on first and second floor) is just not getting powered on.

Please help to resolve as noone in this world is able to help.

Thanks,

Jignesh

Re: my Ruckus AP 510 not getting powered on

jignesh43 — Mon, 19 Jun 2023 20:08:06 GMT

Att

Attaching 510 snapshot for more details :

Re: my Ruckus AP 510 not getting powered on

Imran_ruckus — Mon, 19 Jun 2023 21:42:38 GMT

Hi @jignesh43

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that your RUCKUS setup is not working, and Access Points do not have power.

Could you please let us know the answers to the below queries to assist you better?

1. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the cable connections to the Switch ports)

2. May I know how many Access Points are connected to the Switch?

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: my Ruckus AP 510 not getting powered on

jignesh43 — Mon, 19 Jun 2023 22:17:58 GMT

Re: my Ruckus AP 510 not getting powered on

Imran_ruckus — Mon, 19 Jun 2023 23:49:16 GMT

Hi @jignesh43

Thank you for the information you shared,

As we can see from the picture you shared, there is an amber/orange light on the "SYST" and a green light on the "PWR" on the Switch. Meaning the Switch is stuck in the boot mode.

Basically, due to the power outage/power spike, the switch went to a state that we call ‘boot mode’ that is not able to boot up properly.

Please remove all the ethernet cables from the Switch panel and try to reset as described below.

Please follow the below steps to fix this issue:

First, we will try to reset the Switch as described below:

1. Please try to disconnect from the Power outlet the ICX-7150 and reconnect.

2. Please try to press the reset button using a paper click or a small stick

Remove power from the switch.
Press and hold the Reset button while applying power to the switch.
After all the system LEDs flash amber, release the Reset button.

Below is the Guide and Videos link for your reference:

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE7.html

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

IF RESET IS NOT WORKING, PLEASE TRY TO RESET YOUR SWITCH MULTIPLE TIMES (At least 10-15 times) AS DESCRIBED ABOVE.

IF RESET DOESN’T WORK: Please follow the below steps.

If the reset does not make any difference, we need to perform a software recovery since it can be that the image flash is corrupted in basic words the unit is not able to boot up properly and need re-install the image to boot up properly.

Below is the Guide and Video Link to perform the Software recovery process:

Please refer to the below guide and Video link:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

Video Link: https://www.youtube.com/watch?v=Ql22blH_CGo

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.