topic Re: Lennar Home - Ruckus ICX7150 Switch in RUCKUS Support for Lennar Homes

Lennar Home - Ruckus ICX7150 Switch

StevenG3000 — Wed, 07 Jun 2023 17:34:11 GMT

#FEK3827R077

IMO, a very unorthodox method to get customer support on a failed device. Nonetheless, here I am.

Heartbeat loss multiple times a day.

WAPs lose power.

No internet connection.

Connected devices unable to be accessed remotely due to 'no connection'.

Only been a my home for 2.5 years.

The company that installed the system, Connect Source, say that I NEED A NEW SWITCH.

Please advise.

Re: Lennar Home - Ruckus ICX7150 Switch

Imran_ruckus — Fri, 09 Jun 2023 15:17:31 GMT

admin test

Re: Lennar Home - Ruckus ICX7150 Switch

Imran_ruckus — Fri, 09 Jun 2023 15:21:51 GMT

Hi @StevenG3000

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that your RUCKUS setup is not working, with no Internet connection.

Could you please let us know the answers to the below queries to assist you better?

1. Was this working before? If it worked before, was there any power outage before you started facing this issue?

2. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same showing the light status and the cable connections to the Switch ports)

3. Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from Router to a laptop/PC).

4. May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Lennar Home - Ruckus ICX7150 Switch

StevenG3000 — Sun, 11 Jun 2023 12:47:51 GMT

Answers to questions below.

1. Yes

2. PWR, SYST, STAT all green

3. Yes

4. 2 Click link for pictures

4a. https://drive.google.com/file/d/1_8zK6SSvakRnNdhAsWc9YNvnFJ596fkv/view?usp=sharing

4b. https://drive.google.com/file/d/1_3RqN3Nio_oyUHFniqCLYbhZFWC9czaI/view?usp=sharing

Re: Lennar Home - Ruckus ICX7150 Switch

Imran_ruckus — Mon, 12 Jun 2023 16:36:10 GMT

Hi @StevenG3000

Greetings!!!

Thank you for the response and the information you shared.

This issue may happen when the Switch runs on the Routing code (SPR). The Switch should run on the Switching code (SPS) to avoid these issues for Lennar home users. If the Switch boots up on the other partition (Due to a power outage/power spike) which may be running on a ‘Routing Code’ results in causing this issue. To check the same please follow the below process.

Please follow the below steps and help us with the queries,

1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

2. Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access the Command line should look like this:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command

enable

show version

show flash

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Lennar Home - Ruckus ICX7150 Switch

StevenG3000 — Thu, 15 Jun 2023 14:35:04 GMT

was able to log into Ruckus General System Config. NO clue where to go from there. Can't send screen shot or pic.

Re: Lennar Home - Ruckus ICX7150 Switch

Imran_ruckus — Thu, 15 Jun 2023 15:08:38 GMT

Hi @StevenG3000

Greetings of the day!!!

Thank you for the response and the update.

Could you please let me know if you found the IP Address of the ICX-7150-C12P Switch using IP Scanner as described in my previous post?

If yes, please try to log in to the Putty application, as described in the ‘How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices" guide shared in the previous post. And please share the output of the commands.

You could try the SSH OR Telnet option to log in to CLI (Putty) as described in the same guide- Please refer below

SSH- Port 22

Telnet – Port 23

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.