topic Re: The ruckus device stopped working in RUCKUS Support for Lennar Homes

The ruckus device stopped working

geethasaravanan — Fri, 02 Jun 2023 18:26:19 GMT

The ruckus device stopped working in my home after Wifi router update. Request to resolve this issue.

Re: The ruckus device stopped working

Imran_ruckus — Fri, 02 Jun 2023 18:42:23 GMT

Hi @geethasaravanan

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that your RUCKUS setup is not working after updating the Router.

Could you please let us know the answers to the below queries to assist you better?

1. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same showing the light status and the cable connections to the Switch)

2. Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from Router to a laptop/PC).

3. May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: The ruckus device stopped working

geethasaravanan — Fri, 02 Jun 2023 21:03:35 GMT

Hello Imran,

1. Please see the attached photos of the Ruckus switch and access points.

2. I am able to connect to the Wifi name of the ISP router successfully. The wifi name configured on the Ruckus is not working.

Regards

Re: The ruckus device stopped working

geethasaravanan — Fri, 02 Jun 2023 21:05:13 GMT

What is the default credential to log in to the Ruckus portal?

Re: The ruckus device stopped working

Imran_ruckus — Fri, 02 Jun 2023 21:24:35 GMT

Hi @geethasaravanan

Thank you for the response and the information.

If internet connectivity is stable, please follow the below process.

Please follow the below steps and help us with the queries,

1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

2. Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access the Command line should look like this:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command

enable

show version

show flash

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.