topic Re: Ruckus ICX 7150-C12P / R510 AP not working in RUCKUS Support for Lennar Homes

Ruckus ICX 7150-C12P / R510 AP not working

js — Thu, 13 Apr 2023 15:18:27 GMT

I have a Ruckus ICX 7150-C12P / R510 AP that is not working. Specifically, the R510 AP has no lights. This started after a power outage last night. I've tried restarting everything, but has not worked. The Ruckus ICX 7150 has a green System and Power light. I can see the ehternet from my wifi-router to it is green as well.

I went into the wifi-router, and saw the Ruckus ICX 7150 connected and tried to connect to it directly, but my login/password apparently didn't work. I tried all the combinations listed here as well:
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-passwords-for-the-Ruckus-Wi-Fi-Access-Points/td-p/46740

I greatly appreciate any help someone can provide.

Re: Ruckus ICX 7150-C12P / R510 AP not working

js — Thu, 13 Apr 2023 15:38:53 GMT

I did try to connect hard lined devices to the Ruckus ICX 7150, and those item are working fine / connected to the internet. The 2 APs that I have connected do not light up at all.

Re: Ruckus ICX 7150-C12P / R510 AP not working

Imran_ruckus — Thu, 13 Apr 2023 16:00:43 GMT

Hi @js

Greetings of the day!

Thank you for contacting Lennar Home Community.

Hope you are doing well!!!

Thank you for the detailed information you shared.

From the case description, I could understand that your RUCKUS Access Points have no power after a power outage.

Sometimes the Switch may require a hard reboot (disconnect and connect the switch from the power outlet). Also, Unplug and plug the ethernet cables from the Switch ports panel and plug them back again.

Please let me know if that works or doesn’t work to assist further.

Thank you again for your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

Re: Ruckus ICX 7150-C12P / R510 AP not working

js — Thu, 13 Apr 2023 16:04:11 GMT

Hi Imran,

I did unplug the power and ethernet cables and even unplugged/powered off/on the wifi router that connects to the switch. Did notice that the when I powered it all back on and connected devices directly to the switch, they were able to connect to the internet. However, the APs still do not power on.

Thank you,

Justin

Re: Ruckus ICX 7150-C12P / R510 AP not working

Imran_ruckus — Thu, 13 Apr 2023 16:27:45 GMT

Hi @js

Thank you for the response and the update.

We need to check the Switch ports information from the CLI access. To check the same, please follow the below steps and help us with the output of the CLI commands mentioned in this post below.

Please follow the below steps and help us with the queries,

1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the Switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

2. Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access the Command line should look like this:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command

enable

show version
show inline power
show inline power detail

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

Re: Ruckus ICX 7150-C12P / R510 AP not working

js — Thu, 13 Apr 2023 17:01:24 GMT

telnet@ICX7150-C12-Switch#show version
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserved.
UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
(24723488 bytes) from Primary
SW: Version 08.0.61aT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.10T225 (mnz10110)
Compiled on Sun Jun 25 09:25:15 2017

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3212P0R6
Current License:
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 2 hour(s) 33 minute(s) 32 second(s)
The system started at 00:02:05 GMT+00 Sat Jan 01 2000

The system : started=cold start

telnet@ICX7150-C12-Switch#show inline power

Power Capacity: Total is 124000 mWatts. Current Free is 124000 mWatts.

Power Allocations: Requests Honored 0 times

Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/
State State Consumed Allocated Error
--------------------------------------------------------------------------
1/1/1 Off Off 0 0 n/a n/a 3 n/a
1/1/2 Off Off 0 0 n/a n/a 3 n/a
1/1/3 Off Off 0 0 n/a n/a 3 n/a
1/1/4 Off Off 0 0 n/a n/a 3 n/a
1/1/5 Off Off 0 0 n/a n/a 3 n/a
1/1/6 Off Off 0 0 n/a n/a 3 n/a
1/1/7 Off Off 0 0 n/a n/a 3 n/a
1/1/8 Off Off 0 0 n/a n/a 3 n/a
1/1/9 Off Off 0 0 n/a n/a 3 n/a
1/1/10 Off Off 0 0 n/a n/a 3 n/a
1/1/11 Off Off 0 0 n/a n/a 3 n/a
1/1/12 Off Off 0 0 n/a n/a 3 n/a
--------------------------------------------------------------------------
Total 0 0

telnet@ICX7150-C12-Switch#show inline power detail

Power Supply Data On unit 1:
++++++++++++++++++

Power Supply Data:
++++++++++++++++++

Power Supply #1:
Max Curr: 2.3 Amps
Voltage: 54.0 Volts
Capacity: 124 Watts
PoePower: 124 Watts

POE Details Info. On Unit 1 :

General PoE Data:
+++++++++++++++++

Firmware
Version
----------------
01.8.7 Build 021

Hardware
Version
----------------
V2R2

Cumulative Port State Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports #Ports #Ports #Ports #Ports
Admin-On Admin-Off Oper-On Oper-Off Off-Denied Off-No-PD Off-Fault
-------------------------------------------------------------------------
0 12 0 12 0 0 0

Cumulative Port Power Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports Power Power
Pri: 1 Pri: 2 Pri: 3 Consumption Allocation
-----------------------------------------------
0 0 0 0.000 W 0.000 W

Re: Ruckus ICX 7150-C12P / R510 AP not working

Imran_ruckus — Thu, 13 Apr 2023 17:18:15 GMT

Hi @js

Thank you for the detailed information you shared,

As I can see from the information you shared, the PoE is in the disabled state on all the ports of the Switch (Please refer to the below screenshot). By which the Access Points are unable to get the power.

To enable the PoE on the Switch, please perform the below commands from the CLI:

Switch>enable
No password has been assigned yet...
Switch#configure terminal
Switch(config)#interface ethernet 1/1/1 to 1/1/12
Switch(config-mif-1/1/1-1/1/12)#inline power

Also attaching a Screenshot as a reference:

Once you perform the above process all ports should be On, and APs should get the power.

Also, I would like to suggest upgrading your Switch to the latest stable version, as your current Switch is on the old version which is SPS08061a. Please let me know once you are done with the above process, to assist you with the upgrading of the Switch.

Please let me know if you have any queries in this regard.

NOTE: Please feel free to mark the post as ACCEPTED SOLUTIONS

Thank you again for your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

Re: Ruckus ICX 7150-C12P / R510 AP not working

js — Thu, 13 Apr 2023 18:53:06 GMT

That worked! Thanks so much!

What do I do to update the switch?

Re: Ruckus ICX 7150-C12P / R510 AP not working

Imran_ruckus — Thu, 13 Apr 2023 19:03:41 GMT

Hi @js

Thank you for the response and the update.

Great!!! Good to know that Access Points are working now.

Please follow the below steps for Upgrading your Switch to the latest stable version.

The recommended stable version is 8095g (08.0.95g)-

Below are the options or methods to perform the Upgrade on the switch: You could choose any one of these.

1st Option:

1. In this option, we will use a pen drive or USB flash drive in which we move the files to the pen drive and connect it to the Switch then through CLI we execute the commands to upgrade the Switch using the following guide as a reference:

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2nd Option:

2. The following guide is an example of an upgrade via TFTP server, by using an application (FREE) to send files or upload remote files to a device, in our case, we will use it to update a new version to the Switch, basically it will send the image version remotely from the computer to the switch.

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/td-p/47187

3rd Option:

3. In this option we Upgrade the Switch from the Web Interface (GUI) of switch.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Try to access your switch from a web browser by pasting the below URL in http or https form whichever that works.

https://0.0.0.0 or http://0.0.0.0 (IP address of Switch. 0.0.0.0 is just as an example)

As you can access CLI, I would suggest you follow the 2nd option.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

Re: Ruckus ICX 7150-C12P / R510 AP not working

JoeC — Thu, 07 Mar 2024 16:36:26 GMT

Sir, same here. Green lights on switch. All ports off (I think). I'd like to try to enable the PoEs on the switch please. Whats a CLI?

Re: Ruckus ICX 7150-C12P / R510 AP not working

Imran_ruckus — Thu, 07 Mar 2024 18:52:38 GMT

Hi @JoeC

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

As this case was raised by @js which is old and now closed.

I can see there is another post raised by you on the Lennar forum (please refer to the below link). Please follow the same post thread, I will assist you with the same.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/R510-APs-all-dead-no-lights-at-all/m-p/76667#M14688

Thank you again for understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.