topic Re: 192.168.0.2 is not alive and Switch in boot mode after power outage in RUCKUS Support for Lennar Homes

192.168.0.2 is not alive and Switch in boot mode after power outage

fan_the_man — Mon, 27 Mar 2023 02:44:10 GMT

Hello,

We had a power shortage and ICX7150 stops working.

I connected my laptop to the Ruckus ICX 7150-C12P Switch via putty but the switch remains in "boot" mode. I tried booting from the primary and secondary partitions but for both it says corrupted.

So I followed instructions in this link to try and install a new image, however now I am stuck at "host 192.168.0.2 is not alive" I set all the required environment variables (as can be seen from the snip below). Please help!

Based on the other's post, I found out I have the same issue with others so I need to file RMA. When I file the RMA, they said I cannot do it because I am Lennar's customer and I need your guy's help here to file the RMA. If you could help me, I will be appreciated it.

printenv baudrate=9600 ipaddr=192.168.0.3 serverip=192.168.0.2 netmask=255.255.255.0 gatewayip=192.168.0.2 uboot=mnz10115.bin image_name=SPR08090d.bin ver=10.1.15T225 (Jan 30 2019 - 23:08:47 -0800) Environment size: 189/16379 bytes ICX7150-Boot>saveenv ICX7150-Boot>ping 192.168.0.2 Change GMAC speed to 1000MB Using bcm_xgs_gmac-0 device ping failed; host 192.168.0.2 is not alive ICX7150-Boot>

Re: 192.168.0.2 is not alive and Switch in boot mode after power outage

worawit_waiprib — Mon, 27 Mar 2023 06:26:13 GMT

For "host 192.168.0.2 is not alive"

Are you turning off the Windows firewall?

Try ping from your laptop to switch, 192.168.0.3

Re: 192.168.0.2 is not alive and Switch in boot mode after power outage

Imran_ruckus — Mon, 27 Mar 2023 16:22:06 GMT

Hi @fan_the_man

Thank you for contacting Lennar Home Community.

Hope you are doing well!!!

From the case description, I could understand that your ICX-7150-C12P Switch is stuck on boot mode, and you are in the process of Software recovery.

As mentioned, could you please try to ping from the Laptop to the Switch i.e., 192.168.0.3?

Also, please try to reset the Switch as described below:

1. Please try to disconnect from the Power outlet the ICX-7150 and reconnect.

2. Please try to press the reset button using a paper click or a small stick

Remove power from the switch.
Press and hold the Reset button while applying power to the switch.
After all the system LEDs flash amber, release the Reset button.

Below is the Guide and Videos link for your reference:

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE7.html

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

Lennar Home Community.

Re: 192.168.0.2 is not alive and Switch in boot mode after power outage

fan_the_man — Tue, 28 Mar 2023 03:35:12 GMT

worawit_waiprib

Thank you. I turn off the firewall and it works.

Thanks,

Fan

Re: 192.168.0.2 is not alive and Switch in boot mode after power outage

fan_the_man — Tue, 28 Mar 2023 03:37:07 GMT

Imran_ruckus

Thank you for the response. I did try to unplug and also reset but it is not working. However, after I turn off the firewall, I can be bale to follow the instruction to recovery it. Thanks.

Thanks,

Fan

Re: 192.168.0.2 is not alive and Switch in boot mode after power outage

Imran_ruckus — Tue, 28 Mar 2023 15:43:08 GMT

Hi @fan_the_man

Thank you for the response.

Great!!!

Good to know that the issue is now resolved after turning the firewall off.

We appreciate your time and patience on this case.

Note: Please feel free to mark the post as ACCEPTED SOLUTIONS

Have a great day ahead!!!

Thank you again for contacting RUCKUS Lennar Home Community.