topic Re: How to safely turn off and later on a switch Ruckus ICX7150? in RUCKUS Support for Lennar Homes

How to safely turn off and later on a switch Ruckus ICX7150?

tiago1984 — Tue, 14 Mar 2023 23:49:42 GMT

Hi there, I bought a no break to avoid switch corruptions in the future but wanted to check how can I safely turn off the switch ICX7150 and later turn on after I connect it to the new no break. Is there someone who can help me make the procedure in a safe way?

Re: How to safely turn off and later on a switch Ruckus ICX7150?

Jayavidhya — Wed, 15 Mar 2023 13:01:40 GMT

Hi @tiago1984

Greetings of the day,

We cannot turn off the switch instead you can remove the power. Also please refer the below guide to hardware installation:

https://docs.commscope.com/en-US/bundle/icx7150-installguide/page/GUID-7166F0A4-38D8-4F69-9325-FF07A...

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

RUCKUS UNLEASHED SETUP IN 5 MINUTES (tutorial video)

https://www.youtube.com/watch?v=j8I5aVwMNMg

General Precautions

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-EBA72259-1C90-4B87-A706-F0E49DDC72AF.html

Best regards,

Jayavidhya

Lennar Home Community

Re: How to safely turn off and later on a switch Ruckus ICX7150?

tiago1984 — Fri, 17 Mar 2023 06:23:15 GMT

is there a way to prepare the switch via console its going to be turned off somehow? I want to avoid removing the power and causing it to get stuck in boot mode or get corrupted again like happened when I had a power shortage since I had to pay a tech to fix it. I just want to turn off to add a no break in the system.

Re: How to safely turn off and later on a switch Ruckus ICX7150?

Vásquez_Fer — Fri, 17 Mar 2023 12:56:42 GMT

Hi @tiago1984

Hope you are doing well !

The only way to turn it off is by disconnecting it from the power source , there is no command to turn off the switch.

The way that we can avoid that switch get stuck on boot mode is upgrading to the stable versions for CIX-7150-C12P ( 8095g )

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/td-p/47187

Video Link as reference: https://www.youtube.com/watch?v=DHIEajPhHWQ&t=186s

Via WEB GUI / TFTP option

How to perform an Upgrade via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Via USB/flash driver/ pen drive option

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

Best Regards

Fernando Vasquez