topic ICX 7150 C12P PoE failure in RUCKUS Support for Lennar Homes

ICX 7150 C12P PoE failure

kngoworld — Mon, 06 Feb 2023 04:23:24 GMT

Sorry in advance for my minimal technical experience.

Like so many others, my Lennar new build came with the ruckus switch and the PoE has stopped working. The switch will still work for devices that just need internet access, but if its needs power through the ethernet, it will not work. 3 devices total, the 2 WAP R510's and 1 ring doorbell will not work because they require the PoE. My Syst light and PWR light are both green, but the wires that are PoE have no indicator lights lit up.

If anyone could give me some advise on what to do, update the firmware, check settings, anything. But please treat me like a total beginner and start from the beginning. I am not even sure how to get into the settings of the switch or find the IP address. The IP address I have only sends me to the settings for my router. Please help and thank you in advance.

Re: ICX 7150 C12P PoE failure

Imran_ruckus — Mon, 06 Feb 2023 17:11:07 GMT

Hi kngoworld

Greetings!!!

Thank you for contacting Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

From the case description, I could understand that your PoE devices are not working connected to the ICX-7150-C12P Switch.

As you mentioned that on your ICX-7150-C12P Switch, the SYST and PWR lights are steady green, which means the lights are in a normal state.

Since the switch is in the normal state you can take Console access to the switch in order to verify, if the switch is able to transfer the power to PoE devices via 12 ports.

To check this, first, we have to get access to the switch, and there are Two ways to get access to the switch.

I) By IP Address of the Switch OR
II) By Console Access to the Switch

By IP address: To fix this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access the Command line should look like this:

ICX7150-C12 Router>

Now please perform the following commands and share the output:

enable

Show version

Show inline power

Show inline power detail

By Console access: If access via IP address is not possible here is a guide on how to access to the Switch via console (cable access between your PC to the ICX 7150-C12P) in this case we need a USB type C to USB standard or Console cable Rj45 to USB.

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-7150-12c-using-a-Windows-Machine/td-p/46759

Once you are logged in to the ICX-7150-C12P please follow up the same steps that are on point '2'

Please let me know if you have any queries in this regard.

Best regards,

Imran Sanadi

Lennar Home Community.

Re: ICX 7150 C12P PoE failure

kngoworld — Tue, 07 Feb 2023 05:13:29 GMT

Thank you for the reply, I truly appreciate it and you have already helped me a lot.

After some work, I was able to get the ip address of the ruckus switch, but I had to power off and on the switch a couple times before advanced IP scanner finally found it. But that did not help much because I don't know the username and password and I tried all the usual defaults and they did not work. So I connected to the switch using console with my usb-c to usb wire. I ran the commands you recommended and noticed that the POE were all off. I found another forum with similar issue and found this post:
https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/I-have-an-ICX-7150-C12P-and-the-PoE-has-switched-off/m-p/29583/highlight/true#M898
I ran the commands recommended and the PoE came back on.

Below is everything from the console if you want to read it all. Can you tell if my switch health is good? Should I be concerned the PoE could turn off again? Can you direct me how to reset the usernames and passwords for my switch and my 2 R510s? Should I be upgrading the firmware?

Again, thank you!

enable
No password has been assigned yet...
ICX7150-C12 Switch#
ICX7150-C12 Switch#show version
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserv ed.
UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
(24723488 bytes) from Primary
SW: Version 08.0.61aT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.10T225 (mnz10110 )
Compiled on Sun Jun 25 09:25:15 2017

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3224P09J
Current License:
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 23 minute(s) 57 second(s)
The system started at 00:02:06 GMT+00 Sat Jan 01 2000

The system : started=cold start

ICX7150-C12 Switch#enable
Incomplete command.
ICX7150-C12 Switch#show inline power

Power Capacity: Total is 124000 mWatts. Current Free is 124000 mWatts.

Power Allocations: Requests Honored 0 times

Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/
State State Consumed Allocated Error
--------------------------------------------------------------------------
1/1/1 Off Off 0 0 n/a n/a 3 n/a
1/1/2 Off Off 0 0 n/a n/a 3 n/a
1/1/3 Off Off 0 0 n/a n/a 3 n/a
1/1/4 Off Off 0 0 n/a n/a 3 n/a
1/1/5 Off Off 0 0 n/a n/a 3 n/a
1/1/6 Off Off 0 0 n/a n/a 3 n/a
1/1/7 Off Off 0 0 n/a n/a 3 n/a
1/1/8 Off Off 0 0 n/a n/a 3 n/a
1/1/9 Off Off 0 0 n/a n/a 3 n/a
1/1/10 Off Off 0 0 n/a n/a 3 n/a
1/1/11 Off Off 0 0 n/a n/a 3 n/a
1/1/12 Off Off 0 0 n/a n/a 3 n/a
--------------------------------------------------------------------------
Total 0 0

ICX7150-C12 Switch#show inline power detail

Power Supply Data On unit 1:
++++++++++++++++++

Power Supply Data:
++++++++++++++++++

Power Supply #1:
Max Curr: 2.3 Amps
Voltage: 54.0 Volts
Capacity: 124 Watts
PoePower: 124 Watts

POE Details Info. On Unit 1 :

General PoE Data:
+++++++++++++++++

Firmware
Version
----------------
02.1.0 Build 002

Hardware
Version
----------------
UNKNOWN

Cumulative Port State Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports #Ports #Ports #Ports #Ports
Admin-On Admin-Off Oper-On Oper-Off Off-Denied Off-No-PD Off-Fault
-------------------------------------------------------------------------
0 12 0 12 0 0 0

Cumulative Port Power Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports Power Power
Pri: 1 Pri: 2 Pri: 3 Consumption Allocation
-----------------------------------------------
0 0 0 0.000 W 0.000 W

ICX7150-C12 Switch#en
Incomplete command.
ICX7150-C12 Switch#en con t
Invalid input -> con t
Type ? for a list
ICX7150-C12 Switch#int e 1\1\1
Invalid input -> int e 1\1\1
Type ? for a list
ICX7150-C12 Switch#en
Incomplete command.
ICX7150-C12 Switch#
alias Display configured aliases
boot Boot system from bootp/tftp server/flash image
clear Clear table/statistics/keys
clock Set clock
configure Enter configuration mode
copy Copy between flash, tftp, scp, config/code
debug Enable debugging functions (see also 'undebug')
disable Disable system monitoring
dot1x 802.1X
downgrade_to downgrade to a version prior to 8.0
enable Enable system monitoring
erase Erase image/configuration from flash
execute Execute commands in batch
exit Exit Privileged mode
format format External USB disk
inline Inline power (PoE) configuration/operation
issu In Service Software Upgrade
jitc JITC execution commands
kill Kill active CLI session
license software licenses
mount mount External USB disk
nslookup Nslookup Utility
page-display Display data one page at a time
phy PHY related commands
ping Ping IP node
port Port security command
quit Exit to User level
rconsole Use the console of another unit
reload Halt and perform a warm restart
remote-packet-capture Info about remote packet capture utility
show Display system information
skip-page-display Enable continuous display
ssh SSH by name or IP address / hostkeys
stack stacking runtime commands
stop-traceroute Stop TraceRoute operation
supportsave support save related
telnet Telnet by name or IP address
temperature temperature sensor commands
terminal display syslog
trace-l2 TraceRoute L2
traceroute TraceRoute to IP node
undebug Disable debugging functions (see also 'debug')
unmount unmount External USB disk
verify Verify object contents
whois WHOIS lookup
write Write running configuration to flash or terminal
ICX7150-C12 Switch#inline power
Incomplete command.
ICX7150-C12 Switch#conf t
ICX7150-C12 Switch(config)#interface eth 1\1\1 to 1\1\10
Invalid input -> 1 \1\1 to 1\1\10
Type ? for a list
ICX7150-C12 Switch(config)#conf)
Invalid input -> conf)
Type ? for a list
ICX7150-C12 Switch(config)#conf)#interface eth 1/1/1 to 1/1/10
Invalid input -> conf)#interface eth 1/1/1 to 1/1/10
Type ? for a list
ICX7150-C12 Switch(config)#
ICX7150-C12 Switch(config)##conf t
Invalid input -> #conf t
Type ? for a list
ICX7150-C12 Switch(config)#conf)#interface eth 1/1/1 to 1/1/10
Invalid input -> conf)#interface eth 1/1/1 to 1/1/10
Type ? for a list
ICX7150-C12 Switch(config)#conf-If)#inline power power-by-class 3
Invalid input -> conf-If)#inline power power-by-class 3
Type ? for a list
ICX7150-C12 Switch(config)#lldp run
ICX7150-C12 Switch(config)#fdp run
ICX7150-C12 Switch(config)#cpd run
Invalid input -> cpd run
Type ? for a list
ICX7150-C12 Switch(config)#cpd run
Invalid input -> cpd run
Type ? for a list
ICX7150-C12 Switch(config)#cdp run
ICX7150-C12 Switch(config)#en
ICX7150-C12 Switch#conf t
ICX7150-C12 Switch(config)#lldp run
ICX7150-C12 Switch(config)#cdp run
ICX7150-C12 Switch(config)#fdp run
ICX7150-C12 Switch(config)# lldp run
ICX7150-C12 Switch(config)# cdp run
ICX7150-C12 Switch(config)# fdp run
ICX7150-C12 Switch(config)# int e 1\1\1 to 1\1\12
Invalid input -> 1 \1\1 to 1\1\12
Type ? for a list
ICX7150-C12 Switch(config)# int e 1/1/1 to 1/1/12
ICX7150-C12 Switch(config-mif-1/1/1-1/1/12)# inline power
PoE: Failed power allocation of 30000 mwatts on port 1/1/6. Will retry when more power budget.
PoE: Failed power allocation of 30000 mwatts on port 1/1/7. Will retry when more power budget.
PoE: Failed power allocation of 30000 mwatts on port 1/1/8. Will retry when more power budget.
PoE: Failed power allocation of 30000 mwatts on port 1/1/9. Will retry when more power budget.
PoE: Failed power allocation of 30000 mwatts on port 1/1/10. Will retry when mor e power budget.
PoE: Failed power allocation of 30000 mwatts on port 1/1/11. Will retry when mor e power budget.
ICX7150-C12 Switch(config-mif-1/1/1-1/1/12)#PoE: Power enabled on port 1/1/2.
PoE: Power enabled on port 1/1/3.
PoE: Power disabled on port 1/1/5 because of detection of non-PD. PD detection w ill be disabled on port.
PoE: Power disabled on port 1/1/12 because of detection of non-PD. PD detection will be disabled on port.
PoE: Power enabled on port 1/1/4.

ICX7150-C12 Switch(config-mif-1/1/1-1/1/12)#exit
ICX7150-C12 Switch(config)#exit
ICX7150-C12 Switch#wr mem

There is no startup config file, unable to save legacy config

Flash Memory Write (8192 bytes per dot)
.
Write startup-config done.
Copy Done.
ICX7150-C12 Switch#
ICX7150-C12 Switch#show version
Copyright (c) 1996-2017 Brocade Communications Systems, Inc. All rights reserv ed.
UNIT 1: compiled on Aug 14 2017 at 06:54:44 labeled as SPS08061a
(24723488 bytes) from Primary
SW: Version 08.0.61aT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.10T225 (mnz10110 )
Compiled on Sun Jun 25 09:25:15 2017

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3224P09J
Current License:
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 1 hour(s) 3 minute(s) 17 second(s)
The system started at 00:02:05 GMT+00 Sat Jan 01 2000

The system : started=cold start

ICX7150-C12 Switch#show inline power

Power Capacity: Total is 124000 mWatts. Current Free is 77800 mWatts.

Power Allocations: Requests Honored 10 times

Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/
State State Consumed Allocated Error
--------------------------------------------------------------------------
1/1/1 On Off 0 0 n/a n/a 3 n/a
1/1/2 On On 3400 15400 802.3af Class 3 3 n/a
1/1/3 On On 2100 15400 802.3af n/a 3 n/a
1/1/4 On On 3300 15400 802.3af Class 3 3 n/a
1/1/5 On Non-PD 0 0 n/a n/a 3 n/a
1/1/6 On Off 0 0 n/a n/a 3 n/a
1/1/7 On Off 0 0 n/a n/a 3 n/a
1/1/8 On Off 0 0 n/a n/a 3 n/a
1/1/9 On Off 0 0 n/a n/a 3 n/a
1/1/10 On Off 0 0 n/a n/a 3 n/a
1/1/11 On Off 0 0 n/a n/a 3 n/a
1/1/12 On Non-PD 0 0 n/a n/a 3 n/a
--------------------------------------------------------------------------
Total 8800 46200

ICX7150-C12 Switch#show inline power detail

Power Supply Data On unit 1:
++++++++++++++++++

Power Supply Data:
++++++++++++++++++

Power Supply #1:
Max Curr: 2.3 Amps
Voltage: 54.0 Volts
Capacity: 124 Watts
PoePower: 124 Watts

POE Details Info. On Unit 1 :

General PoE Data:
+++++++++++++++++

Firmware
Version
----------------
02.1.0 Build 002

Hardware
Version
----------------
UNKNOWN

Cumulative Port State Data:
+++++++++++++++++++++++++++

Cumulative Port Power Data:
+++++++++++++++++++++++++++

#Ports #Ports #Ports Power Power
Pri: 1 Pri: 2 Pri: 3 Consumption Allocation
-----------------------------------------------
0 0 12 8.700 W 46.200 W

ICX7150-C12 Switch#^C
ICX7150-C12 Switch#

Re: ICX 7150 C12P PoE failure

Imran_ruckus — Tue, 07 Feb 2023 16:18:51 GMT

Hi kngoworld

Greetings of the day!!!

Hope you are doing well!!!

Thank you for the information you shared.

From the information you shared, I understood that the PoE of the ports was in the off/disabled state, as a result of which you were unable to get the ports working. And now you have enabled the PoE on all of the ports and they are working.

Please find the answers to your queries below:

Can you tell if my switch health is good?

The Switch is now in a normal state. However, we can see that the Switch is in an unsupported and unstable version (8061a). To avoid any issues in the future, we suggest you Upgrade the switch to a new latest stable version (8095g version). I will explain how to Upgrade the Switch in the later part of this post.

Should I be concerned the PoE could turn off again?

The PoE may get turned off due to a sudden power outage/power spike.

Can you direct me on how to reset the usernames and passwords for my switch and my 2 R510s?

Reset Password process for ICX-7150-C12P Switch:

Please try using the below-mentioned default Switch Credentials:

Username: super

Password: sp-admin

Below is a guide to check with default credentials:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-passwords-for-the-Ruckus-Wi-Fi-Access-Points/td-p/46740

If default credentials do not work, please follow the below steps to reset the Password on the ICX-7150-C12P Switch:

Please follow the below guide to perform password recovery:

Password Recovery on a Ruckus ICX Tutorial video

https://www.youtube.com/watch?v=XJS28DWbHM4

Recovery Process:

Console access to the switch.

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-71...

2. Reboot the switch with the console cable attached and press "b" until the following is displayed.

Enter 'b' to stop at boot monitor: 0

Using the following commands to remove the password

no password
boot_secondary

Now again reset your new credentials as mentioned in the steps below:

Edit the current or create a new password and username by using the below commands:

enable

configure terminal

device(config)# username super password pass

Where the username is ’super’ and password ‘pass’

In order to allow the correct authentication please run the following commands:

Device(config)#crypto key generate rsa

device(config)# aaa authentication login default local

Now you could try using your new credentials to log in.

Reset Password process for R510 Access Point:

In order to reset the credentials on the Access Point, we have to perform the Factory reset to the AP, as described below.

Here are the steps to reset the password and username for your Ruckus Access Point on the ceiling.

Please read the following guide carefully:

Physical Factory Reset an Access Points Ruckus:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Access-Points-Ruckus/td-p/47056

Ruckus Unleashed Set-up using your Mobile:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Ruckus-Unleashed-Set-up-using-your-Mobile/td-p/47086

Should I be upgrading the firmware?

As mentioned above, since you are in an unsupported and unstable version (8061a). To avoid any issues in the future, we suggest you Upgrade the switch to a new latest stable version (8095g version).

The recommended stable version is 8095g-

Below are the options or methods to perform the Upgrade on the switch:

1^st Option:

In this option, we will use a pen drive or USB flash drive in which we move the files to the pen drive and connect it to the Switch then through CLI we execute the commands to upgrade the Switch using the following guide as a reference:

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2^nd Option:

The following guide is an example of an upgrade via TFTP server, by using an application (FREE) to send files or upload remote files to a device, in our case, we will use it to update a new version to the Switch, basically it will send the image version remotely from the computer to the switch.

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/td-p/47187

Please let me know if you have any queries in this regard.

Best regards,

Imran Sanadi

Lennar Home Community.