topic Re: Setting up Ruckus and at&t gateway together with same SSID in RUCKUS Support for Lennar Homes

Setting up Ruckus and at&t gateway together with same SSID

sanjiva_srivast — Wed, 03 Jun 2020 23:09:42 GMT

I have a Lennar home with Ruckus r510 and ICX 7150 C12P. I am using it's SSID for all my wi-fi needs. I have internet through at&t and the gateway is also broadcasting a wi-fi SSID that is different than the Ruckus AP. Can I turn the wi-fi off on my gateway? Is this the correct configuration? I want the at&t gateway to have the same SSID so I can get extended coverage...how do I set it up? Does my at&t gateway need to be the primary wi-fi and Ruckus be the bridge? or vice-versa? Also, when the Amazon guy activated the smart home he did not leave any user name and password to get into the Ruckus admin settings. I can get to the unleashed login page but the default user name super/sp-admin does not work. Please help!!!

Re: Setting up Ruckus and at&t gateway together with same SSID

andrew_giancol1 — Wed, 03 Jun 2020 23:20:19 GMT

Password & Usernames:
I would contact AMZN or the builder, let them know the tech neglected to give you the admin/pass for the system
ATT Router:
I recommend turning off the ATT Router's Wi-Fi, or only broadcasting a simple management WI-Fi should you need to jump in and do some administration. Power level control, intelligence, interference mitigation, and roaming cohesiveness is something the ATT unit will not participate in.

Re: Setting up Ruckus and at&t gateway together with same SSID

tom_shanahan_d3 — Thu, 04 Jun 2020 15:00:05 GMT

I had a similair issue with access to Ruckus unleashed and Lennar shared that the username was admin and the password was Ruckus! Obviously you should change them once you log in

Re: Setting up Ruckus and at&t gateway together with same SSID

andrew_giancol1 — Thu, 04 Jun 2020 17:20:54 GMT

Tom, you are RAD!

Re: Setting up Ruckus and at&t gateway together with same SSID

sanjiva_srivast — Thu, 04 Jun 2020 17:45:14 GMT

Thank you both! The user and password combination does not work for me. I have contacted the builder and awaiting reply.

Re: Setting up Ruckus and at&t gateway together with same SSID

sanjiva_srivast — Fri, 05 Jun 2020 04:43:54 GMT

Phew! Finally figured it out.... the user name was admin and password was same as my wifi password!

Re: Setting up Ruckus and at&t gateway together with same SSID

sanjiva_srivast — Fri, 05 Jun 2020 04:45:52 GMT

Is there any way to add a. 3rd party wifi router as an extender to the Ruckus R510 AP? I looked everywhere in the settings but could not find any place to do so. Appreciate your quick responses. Also, my at7t is a 1 Gbps connection but I don't see speeds more than 250 mpbs even when I am under the R510 AP. Any suggestions?

Re: Setting up Ruckus and at&t gateway together with same SSID

thomas_fankhaus — Fri, 05 Jun 2020 11:31:51 GMT

you should not add a 3rd party accesspoint.
use a ruckus accesspoint to extend your range.
you ca also take a R320

Re: Setting up Ruckus and at&t gateway together with same SSID

sanjiva_srivast — Fri, 05 Jun 2020 13:36:46 GMT

Awesome! Thanks.

Re: Setting up Ruckus and at&t gateway together with same SSID

ravindra_gaikwa — Mon, 20 Jul 2020 16:05:54 GMT

hi, I have setup my rukus wireless but internet is not working on that router via at&t. Whats steps/setup are required on at&t router in order to use rukus as my router?

Re: Setting up Ruckus and at&t gateway together with same SSID

sanjay_kumar — Tue, 21 Jul 2020 05:24:24 GMT

Hi Ravindra,

Login the AP and ensure that the AP has internet. (which should be getting from the at&t device)
You can verify it under Dashboard >> Internet >> You should see that there should be an IP under DNS and the "Internet" should show as "Connected".

If the Internet is not connected, then ensure the AP should be getting the IP address from at&t (which I believe is the gateway for your network and serving as DHCP server).

Re: Setting up Ruckus and at&t gateway together with same SSID

sergiosoto78 — Thu, 26 Nov 2020 07:02:35 GMT

What do you mean the same as your WiFi password?

Re: Setting up Ruckus and at&t gateway together with same SSID

matt_bassel — Wed, 10 Feb 2021 19:43:16 GMT

Just FYI for anyone coming through here later, sometimes Lennar sets up the password to be "Lennar" (no quotes).

Re: Setting up Ruckus and at&t gateway together with same SSID

sean_fahey — Sat, 20 Feb 2021 02:20:18 GMT

Admin

lennar is the password

Re: Setting up Ruckus and at&t gateway together with same SSID

enrique_a_cardo — Sat, 20 Feb 2021 15:40:02 GMT

I have the worst Lennar customer service experience. They send the electrician and did the factory reset procedure. After noticed that the Ruckus WIFI is no listed on the PC, he said I don't know how to work with the network.

What now?

Re: Setting up Ruckus and at&t gateway together with same SSID

sean_fahey — Sat, 20 Feb 2021 16:53:12 GMT

You have to set up ruckus again download the ruckus unleashed app then start on the typical or gateway install doesn’t lennar homes have Amazon services come out and do your setup and add all your devices to the ruckus

Re: Setting up Ruckus and at&t gateway together with same SSID

enrique_a_cardo — Sat, 20 Feb 2021 16:59:44 GMT

Lennar send an electrician and did the factory reset procedure. Lennar doesn't have network service. After that I don't see the configure.mexxxx in the Wifi list. So I can not access the switch condition. I try to get in they the IP but seems to be protected and I don't have neither user not.password

Re: Setting up Ruckus and at&t gateway together with same SSID

sean_fahey — Sat, 20 Feb 2021 17:13:09 GMT

Re: Setting up Ruckus and at&t gateway together with same SSID

enrique_a_cardo — Sat, 20 Feb 2021 17:36:10 GMT

I did the reset on the PoE and on the switch icx 7150. Still not seeing the configure.mexxxx. Any other suggestion?

Re: Setting up Ruckus and at&t gateway together with same SSID

sean_fahey — Sat, 20 Feb 2021 17:47:05 GMT

Is the att router going into one of the center 8 inputs if so then you may not have to reconfigure and just click on manage network admin and the Lennar password the update rukus and see if that works