topic Re: Log into admin settings on ICX switch in RUCKUS Support for Lennar Homes

Log into admin settings on ICX switch

jasegb — Tue, 27 Dec 2022 22:59:11 GMT

Is there a way to log into the switch so I can unblock a port?

Re: Log into admin settings on ICX switch

Vásquez_Fer — Wed, 28 Dec 2022 12:39:17 GMT

Hi @jasegb

Hope you are doing well !

There are 2 ways how to access to the Switch via IP address (Logical) or via Console cable (physical )

1-An IP address is a unique address (logical) that identifies a device on the internet or a local network.

I will leave you a guide how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

Once we identified the IP address of the switch proceed to access remote to the device 'command Line'

How to remotely access to 'ICX 7150-12P' or 'access points' "Network devices"

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access to the Command line should look like this:

ICX7150-C12 Switch>

2-If the access via IP address is not possible here is a guide how to access to the Switch via console (cable access between your PC to the ICX 7150-C12P) in this case we need a USB type C to USB standard or Console cable Rj45 to USB.

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-7150-12c-using-a-Windows-Machine/td-p/46759

Best Regards

Fernando Vasquez

Re: Log into admin settings on ICX switch

jasegb — Fri, 30 Dec 2022 15:20:07 GMT

I do not use “command” style navigation. In the past I have used an application to gain access to the switch. I will not work off of basic command functions. Please navigate me to the link to an application for my needs as you have done in the past. This was the way I accessed when we initially had this set up over two years ago. Your way is unacceptable.

Re: Log into admin settings on ICX switch

Vásquez_Fer — Fri, 30 Dec 2022 15:38:45 GMT

Hi @jasegb

Hope you are doing well !

In this guide mentioned how to log in into the web browser option

How to find my Ruckus “Devices IP address” using free applications

Also here another for reference :

How to perform an Upgrade via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Best Regards

Fernando Vasquez