topic No power to AP in RUCKUS Support for Lennar Homes

No power to AP

AmandaO — Sat, 24 Dec 2022 15:35:41 GMT

I have a ruckus switch ICX 7150-C12P. The power went out and rebooted it. I am now left with the switch having a lit up amber light on syst and a green on power. I have tried repowering the modem and the switch itself. I have also reseated all cat 5 cables to and from the switch and the AP’s. The AP’s currently have no power since the switch is POE. Does anyone have a solution to get the switch to resend out internet signal to the AP’s?

Sgatjens — Mon, 26 Dec 2022 13:36:32 GMT

Hello

It seems that you have to perform a software recovery.

Symptoms:

*The Switch will not provide power to any PoE devices (Doorbell, cameras, even the Access Points).

*Will not have connectivity to the devices connected to the Switch.

*The ISP router will work fine.

*Console access will be the only access available.

*System light will be yellow/orange/Amber.

Please follow the link below to be able to recover your switch:

How to perform a Software recovery on an ICX7150 switch

AmandaO — Tue, 27 Dec 2022 15:40:31 GMT

I've tried this and no luck.

Vásquez_Fer — Tue, 27 Dec 2022 15:46:47 GMT

Please provide an image where you are trying to connect via console. ICX 7150 - C12 P (USB type C to USB ) PC .

Best Regards

Fernando Vasquez