topic Re: Turned off both bands can’t access AP wifi in RUCKUS Support for Lennar Homes

Turned off both bands can’t access AP wifi

502angler — Sun, 13 Nov 2022 18:03:26 GMT

I believe I may have accidentally turned off both bands (2.4/5) through unleashed mobile. Now I am unable to see my network. I can see my router wifi still if I turn it on. Both of my AP’s have solid green light on power but nothing for 2.4 or 5. I have tried accessing the switch through putty but it is above my understanding. Please help.

Re: Turned off both bands can’t access AP wifi

vijaykuniyal — Sun, 13 Nov 2022 19:55:34 GMT

Hi 502angler,

You can access the Unleashed AP GUI with Unleashed AP IP address via cable network using a Web browser and then you can re-enable the AP radio.

From web Login page>>>>>

Select Access Point>>>>>

Select AP Summary>>>>>Edit

Verify Status of WLAN service>>>> If Disable>>>Change to Enable on both the radio and Click OK.

Same settings can be verified from individual AP>>>>>Edit>>>> if WLAN service>>>>>Override Group Config is in checked state and Disable>>>>Change to Enable.

Re: Turned off both bands can’t access AP wifi

briana1917 — Wed, 21 Dec 2022 22:57:44 GMT

I have the same issue. How do i get to that web page? please help me step by step. Not very tech savy

Re: Turned off both bands can’t access AP wifi

vijaykuniyal — Thu, 22 Dec 2022 18:05:40 GMT

Hi,

You will need to know the IP address of your AP, which will be in below format and you need to open the below link in a browser and then follow the steps provided previously.

https://10.176.27.50/