topic Re: ICX 7150-C12P Dead/Won't Boot in RUCKUS Support for Lennar Homes

ICX 7150-C12P Dead/Won't Boot

Jxck — Wed, 03 Jun 2026 02:31:11 GMT

Hello, I have an ICX-7150-C12P, that has stopped working. When plugged, in all lights flash, for a second then all go away, and none come back on. I have unplugged and plugged into different outlets. Can this be warrantied?

Re: ICX 7150-C12P Dead/Won't Boot

Imran_ruckus — Wed, 03 Jun 2026 12:22:02 GMT

Hi @Jxck

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that your RUCKUS ICX-7150-C12P Switch is not operational.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

If that doesn't work even with a working power cord, I recommend again attempting a physical factory reset multiple times, as outlined in our RUCKUS Lennar Knowledge Base self-help article accessible through this link and VIDEO:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Process-for-performing-a-physical-factory-reset-hard-reset-on/ta-p/80783

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

If the initial reset attempts do not resolve the issue, please try resetting your switch multiple times (approximately 30-40 times) using the method described in the article. In some cases, repeated attempts have successfully resolved similar issues. Upon successful reset, the SYST and PWR lights should turn GREEN.

Please proceed with these steps and let me know if the switch powers on successfully afterward.

Thank you for your patience and cooperation in this matter.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: ICX 7150-C12P Dead/Won't Boot

Jxck — Wed, 03 Jun 2026 23:17:00 GMT

Hello Imran,

I have attempted the reset multiple times using the provided tutorial, and my switch continues to act the same. When plugged in the lights flash orange and just go away. It continues to not work.

Thank you

Re: ICX 7150-C12P Dead/Won't Boot

Imran_ruckus — Thu, 04 Jun 2026 12:40:29 GMT

Hi @Jxck

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

I hope this message finds you well.

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.

To proceed, we kindly request that you follow the steps outlined below:

1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.

2. Capture both pictures and a video of the switch, focusing on the following:

- The status of the lights on the switch.

- The cord connected to the switch.

- The switch plugged into a working power outlet.

Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support