topic Re: failed ICX7150-C12P in RUCKUS Support for Lennar Homes

failed ICX7150-C12P

rjenny — Sun, 05 Apr 2026 02:09:50 GMT

I have an ICX7150-C12P switch that came with my lennar home and prior to its demise last year the wifi in my house was always unreliable. The unit is completely dead (no lights.. nothing). I tried connecting to it with instructions in other posts using my laptop but it won't connect at all. Is there any way to service these units or has there been any type of a recall or do I just need to give up and find new equipment?

Re: failed ICX7150-C12P

Imran_ruckus — Mon, 06 Apr 2026 14:33:05 GMT

Hi @rjenny

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that you are encountering issues with RUCKUS ICX-7150-C12P Switch.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

We recommend attempting a physical factory reset multiple times, as outlined in our RUCKUS Lennar Knowledge Base self-help article accessible through this link and VIDEO:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Process-for-performing-a-physical-factory-reset-hard-reset-on/ta-p/80783

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

If the initial reset attempts do not resolve the issue, please try resetting your switch multiple times (approximately 20-25 times) using the method described in the article. In some cases, repeated attempts have successfully resolved similar issues. Upon successful reset, the SYST and PWR lights should turn GREEN.

Please proceed with these steps and let me know if the switch powers on successfully afterward.

Thank you for your patience and cooperation in this matter.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: failed ICX7150-C12P

rjenny — Mon, 06 Apr 2026 19:38:52 GMT

I followed the instructions and attempted to reset the unit 30 times and there is still no sign of life. No lights at all.

Re: failed ICX7150-C12P

Imran_ruckus — Mon, 06 Apr 2026 19:45:59 GMT

Hi @rjenny

Greetings!!!

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on even after trying physical reset.

To proceed, we kindly request that you follow the steps outlined below:

1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.

2. Capture both pictures and a video of the switch, focusing on the following:

- The status of the lights on the switch.

- The cord connected to the switch.

- The switch plugged into a working power outlet.

We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:

Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: failed ICX7150-C12P

rjenny — Mon, 06 Apr 2026 20:21:37 GMT

Re: failed ICX7150-C12P

rjenny — Mon, 06 Apr 2026 20:30:45 GMT

I think I uploaded the movie to the google link. Can you see it?

Re: failed ICX7150-C12P

Imran_ruckus — Mon, 06 Apr 2026 20:56:11 GMT

Hi @rjenny

Thank you for sharing the requested video and the information.

Based on the troubleshooting performed, your ICX-7150-C12P Switch is not responding properly, and the Switch is dead. A hard reset was also attempted; however, the issue still persists.

As a result, this Switch unit appears to be defective and needs to be replaced through the RMA (Return Merchandise Authorization) process.

To initiate the replacement, Please use the private chat option to respond so we can proceed further. For your reference, I have included a screenshot below.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: failed ICX7150-C12P

Imran_ruckus — Tue, 07 Apr 2026 12:47:47 GMT

Hi @rjenny

Greetings!

I’ve raised an RMA case and sent you a private message with the RMA details.

You will receive further notifications from the RMA case.

Please check and let me know if you have any questions.

Thank you once again for your patience.

If your issue has been fully addressed, please click the Kudos button and mark the responses as an Accepted Solutions.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support