topic Re: Looking to replace my current (2) Ruckus R510 series and Ruckus ICX 710-C12P in RUCKUS Support for Lennar Homes

Looking to replace my current (2) Ruckus R510 series and Ruckus ICX 710-C12P

stowfmly — Thu, 12 Mar 2026 00:06:15 GMT

I am looking to upgrade my current two Ruckus R510 series (MFG PN 9U1-R510-US00) and a Ruckus ICX 7150-C12P with the latest WiFi 7 access point extenders. The R510 are hardwired and ceiling mounted. I am looking for a direct Ruckus replacement or the latest extender options. My current is peed is 1000 Mbps.

Re: Looking to replace my current (2) Ruckus R510 series and Ruckus ICX 710-C12P

pinky_ruckus — Thu, 12 Mar 2026 13:19:30 GMT

Hello @stowfmly ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you are looking to upgrade the RUCKUS devices.

We may need to check some configurations of your RUCKUS ICX-7150-C12P Switch to proceed further.

To proceed with this, please follow the steps outlined below to access the Command Line Interface (CLI) and provide the necessary command outputs:

1. First, identify the current IP address assigned to the switch ICX-7150-C12P by your local router. You can use an IP scanner tool to easily locate the switch's IP address on your network. Here is a guide on how to perform this using IP Scanner free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-o...

2. Once you have identified the IP address of the switch, proceed to access the Command Line Interface (CLI) of the RUCKUS ICX-7150-C12P switch. Here is a guide on how to access the CLI:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-access-the-Command-Li...

If you can access the Command line the prompt should look like below:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

3. After successfully accessing the CLI, please execute the following commands and provide the outputs:

enable

show version

show flash

show inline power

show inline power detail

show interface brief

show lldp neighbors detail

Please share the command outputs or screenshots if you encounter any issues or errors during these steps.

Feel free to reach out if you have any questions or require further assistance.

Thank you for your cooperation and patience.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

Re: Looking to replace my current (2) Ruckus R510 series and Ruckus ICX 710-C12P

pinky_ruckus — Mon, 16 Mar 2026 13:37:43 GMT

Hello @stowfmly ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Looking to replace my current (2) Ruckus R510 series and Ruckus ICX 710-C12P

pinky_ruckus — Mon, 23 Mar 2026 14:11:52 GMT

Hello @stowfmly ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Looking to replace my current (2) Ruckus R510 series and Ruckus ICX 710-C12P

pinky_ruckus — Mon, 30 Mar 2026 13:52:11 GMT

Hi @stowfmly ,

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community