Configuring using laptop through cat5e cable

mamachachi213 — Thu, 18 Sep 2025 04:59:31 GMT

This is Victor, we just purchased lennar home from a friend last month. Trying to configure rukus 7150 using laptop via cat5e ethernet.
Connected laptop to cat5e and rukus 7150 to one of 12 ports. Then tried finding wifi signal for configure me, but never comes up. Tried searching 192.168.0.1 or 0.22 for configure me page, but no page opens. Can you please help me what am I doing wrong?

Do i need to press reset for 30 seconds then configure me page would come up? Objective is to reset the access point names and password using laptop and cat5e cable to rukus.

Plz let me know

Thank You

Re: Configuring using laptop through cat5e cable

pinky_ruckus — Thu, 18 Sep 2025 13:18:58 GMT

Hello @mamachachi213 ,

Greetings!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you have purchased a new Lennar home and facing issues with the Ruckus setup.

For guidance on setting up your system, please refer to the RUCKUS Lennar Knowledge Base self-help article linked below. The article includes detailed instructions for the setup process.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/RUCKUS-Lennar-Home-devices-Connectivity-Setup-and-Configuration/ta-p/96170

Please let us know if you have any queries in this regard.

Should you require further assistance or have any questions, please do not hesitate to reach out.

Thank you once again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community

topic Configuring using laptop through cat5e cable in RUCKUS Support for Lennar Homes

Configuring using laptop through cat5e cable

Re: Configuring using laptop through cat5e cable