topic Re: Ruckus R510 Access Point ran out of Battery? in RUCKUS Support for Lennar Homes

Ruckus R510 Access Point, no Power, ran out of Battery?

Auggie — Wed, 17 Sep 2025 19:54:12 GMT

Note: this is a Lennar Home setup.

One of my Ruckus Unleashed Access Point is dead, no lights no power. I was able to take it off the ceiling mount, to my surprise it only had an Ethernet connection, no sign of power supply. Does that mean it ran on battery for the last 4 years?

See 2 photos: https://imgur.com/a/4NXu4sP

I noticed it had a 120v outlet connector on the back so I use a 120v cable plug to see if jt would turn on, and it did, which means the battery on this one is dead?

How can I replace the battery? What type of battery? There’s a unique screw on the bottom holding the AP together but I don’t have a screwdriver head to use on it. Can I leave my 120v cable on to charge the battery if that’s even possible?

Re: Ruckus R510 Access Point ran out of Battery?

Imran_ruckus — Wed, 17 Sep 2025 19:33:23 GMT

Hi @Auggie
Greetings!!!

Thank you for contacting the RUCKUS Community forums.

Could you please let me know if this is a Lennar Home RUCKUS setup?

Please confirm.

Thank you again.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: Ruckus R510 Access Point ran out of Battery?

Auggie — Wed, 17 Sep 2025 19:46:02 GMT

Yes it’s exactly Lennar Home Setup! Home was built in 2020. Here’s a photo of annother angle of where the AP was installed in the ceiling.

Re: Ruckus R510 Access Point ran out of Battery?

Imran_ruckus — Wed, 17 Sep 2025 19:53:55 GMT

Hi @Auggie

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

Based on the information provided, it appears that one of your RUCKUS Access Points is not powering ON.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

Please note, these Access Points (APs) receive power through Power over Ethernet (PoE) function. That is it receives power through the Switch Ports. There is no battery involved.

To better assist you, could you please provide the following information:

When your switch is connected to the outlet, do you observe any illuminated lights (amber or green)? Kindly describe which lights are visible. Additionally, please provide a photo showing the status of the lights and the full switch panel with cable connections to the switch ports.

Please log into your RUCKUS Account before uploading these photos/screenshots.

Should you have any further questions or concerns, feel free to reach out.

We appreciate your cooperation and look forward to resolving this matter for you promptly.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: Ruckus R510 Access Point ran out of Battery?

Auggie — Wed, 17 Sep 2025 20:26:13 GMT

Ah! So the issue was the Ethernet cable connecting the AP to the Switch itself, noticed the clip was broken and so the connnection was loose. I tightened it and now power is back on the AP. Thank you!

There was no reason for me to unmount the AP since the issue was on the Switch side lol.

Re: Ruckus R510 Access Point ran out of Battery?

Imran_ruckus — Wed, 17 Sep 2025 20:27:51 GMT

Hi @Auggie

Thank you for your response.

That’s great to hear! I’m glad the issue has been resolved.

We truly appreciate your time and patience throughout this case.
Thank you once again for reaching out to the RUCKUS Lennar Home Community. Should you have any further questions or need assistance in the future, please don’t hesitate to contact us.

Wishing you a wonderful day ahead!

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support