topic Re: No power to the box in RUCKUS Support for Lennar Homes

No power to the box

coolcardo — Wed, 20 Aug 2025 02:49:23 GMT

No power to the box. No success after trying numerous reset attempts.

Re: No power to the box

pinky_ruckus — Wed, 20 Aug 2025 13:28:10 GMT

Hi @coolcardo ,

Greetings!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

From the case description, I understand that your RUCKUS Switch is not turning on even after performing multiple resets.

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

Please refer to the below pictures as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: No power to the box

coolcardo — Wed, 20 Aug 2025 23:32:26 GMT

Video has been uploaded. As you’ll see, when I plug in the power chord into an outlet it quickly turns on (Green lights) show for a second then goes off. I used an extension chord to try other outlets but yielded the same result. The primary outlet has power because other devices are plugged into the power strip and those too were tested with no power issues.

Re: No power to the box

pinky_ruckus — Thu, 21 Aug 2025 13:18:34 GMT

Hi @coolcardo ,

Thank you for sharing the requested VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up even after connecting it to working power outlet, and when plugged in, all lights are off. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.