topic Re: ICX 7150-C12P Will not power on in RUCKUS Support for Lennar Homes

ICX 7150-C12P Will not power on

jjfleck1 — Fri, 18 Jul 2025 16:10:27 GMT

I have a Ruckus ICX 7150-C12P in my Lennar home from 2017. None of the lights will power on and I have lost connectivity.

When I unplug/plug in the light flashes green one time and then no power. I have tried various outlets, power cords, and also tried to reset and nothing works. It does the same thing every time with flashing green once and then shutting off, Is this fixable or does it need to be replaced?

Thanks

Re: ICX 7150-C12P Will not power on

Imran_ruckus — Fri, 18 Jul 2025 16:22:07 GMT

Hi @jjfleck1

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

I hope this message finds you well.

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.

To proceed, we kindly request that you follow the steps outlined below:

1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.

2. Capture both pictures and a video of the switch, focusing on the following:

- The status of the lights on the switch.

- The cord connected to the switch.

- The switch plugged into a working power outlet.

We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:

Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: ICX 7150-C12P Will not power on

Imran_ruckus — Mon, 21 Jul 2025 12:48:23 GMT

Hi @jjfleck1

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: ICX 7150-C12P Will not power on

jjfleck1 — Tue, 22 Jul 2025 18:39:02 GMT

Imran,

I am still having the same issue, I had uploaded the photos and video to the link you provided. What is the status on your end?

Thanks

Re: ICX 7150-C12P Will not power on

Imran_ruckus — Tue, 22 Jul 2025 19:02:24 GMT

Hi @jjfleck1

Greetings of the day!!!

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, its LEDs do not turn on. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists.

As a result, this Switch unit appears to be defective and needs to be replaced through the RMA (Return Merchandise Authorization) process.

To initiate the replacement, please contact us via chat using the link provided below in this post. Kindly copy the URL/link of this post and paste it in the chat along with the serial number of your RUCKUS Switch when prompted.

Please refer to the example screenshot below for guidance on how to copy and share the required information:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support