topic Re: ICX 7150-C12P Will not power on in RUCKUS Support for Lennar Homes

ICX 7150-C12P Will not power on

hollows12 — Tue, 15 Jul 2025 14:56:29 GMT

I have a ~7 year old Ruckus ICX 7150-C12P that sort of died this week. None of the lights will power on and I lost connectivity.

When I unplug/plug the power in the LEDS (stats, spd, ID, etc) briefly turn yellow on and then turn off. I have tried a few different outlets while also holding down the reset button. No luck, the unit will not turn on. Is this thing fried? Looking for any help, thanks in advance.

Re: ICX 7150-C12P Will not power on

Imran_ruckus — Tue, 15 Jul 2025 15:01:46 GMT

Hi @hollows12

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

I hope this message finds you well.

We appreciate the information you provided regarding your RUCKUS ICX-7150-C12P Switch not powering on.

To proceed, we kindly request that you follow the steps outlined below:

1. Take out your Switch from the cabin. Plug your ICX-7150-C12P Switch into a functioning power outlet.

2. Capture both pictures and a video of the switch, focusing on the following:

- The status of the lights on the switch.

- The cord connected to the switch.

- The switch is plugged into a working power outlet.

We recommend referring to the example pictures provided below to ensure clarity in capturing the required details:

Please use the provided link to upload a video. We advise referencing the EXAMPLE VIDEO in the Google Drive link provided to ensure consistency in the recording:

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Should you have any queries or require further assistance, please do not hesitate to reach out. We are here to help.

Thank you for your cooperation, patience, and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: ICX 7150-C12P Will not power on

hollows12 — Tue, 15 Jul 2025 15:14:18 GMT

Am I uploading the video to that google drive there?

Re: ICX 7150-C12P Will not power on

hollows12 — Tue, 15 Jul 2025 15:25:08 GMT

@imran_ruckus

Uploaded video/pictures following the above example to the Google Drive link

Re: ICX 7150-C12P Will not power on

Imran_ruckus — Tue, 15 Jul 2025 15:42:34 GMT

Hi @hollows12

Greetings of the day!!!

Thank you for sharing the requested PICTURES and a VIDEO.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up, and when plugged in, it flashes an amber light and then goes dark. And you confirm that the Switch is plugged into a well-known outlet/power source. However, the failure persists.

As a result, this Switch unit appears to be defective and needs to be replaced through the RMA (Return Merchandise Authorization) process.

To initiate the replacement, please contact us via chat using the link provided below in this post. Kindly copy the URL/link of this post and paste it in the chat along with the serial number of your RUCKUS Switch when prompted.

Please refer to the example screenshot below for guidance on how to copy and share the required information:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support