topic Re: I accidentally flashed r610 firmware on am r710 in RUCKUS Support for Lennar Homes

I accidentally flashed r610 firmware on am r710

Plato12 — Wed, 17 Aug 2022 05:21:45 GMT

How screwed am I? It went through and now I'm unable to get to 192.168.0.1. I used r610_200.6.10.1.308.bl7. Did i brick my device?

Re: I accidentally flashed r610 firmware on am r710

Plato12 — Wed, 17 Aug 2022 08:13:45 GMT

Well. I looked for some information here and was able to console in via putty. I attempted to tftp over the r710 firmware created the command text file as a .rcks. Ran it. It took the file and all seemed well, but after a reboot it no longer sees my physical connection to my latop after a while and drops. It connects and drops and now I have no way of talking to the device. I screwed up.

Re: I accidentally flashed r610 firmware on am r710

Plato12 — Wed, 17 Aug 2022 08:35:11 GMT

Welp. I don't know what happened. Walked away for 30 minutes and came back. I had held down the reset but it didn't work. I came back after some time... 192.168.0.1 magically logged and the firmware worked. Wtf. I'm good. How. Fn magic.

Re: I accidentally flashed r610 firmware on am r710

sarita_shekhar — Thu, 18 Aug 2022 15:30:45 GMT

Hello @Plato12 ,

Since the hard reset helped regain the access to the AP, I would also suggest you to re-flash the AP with the correct firmware.

You can download the AP R710 Unleash image from the below link:-

Latest version: https://support.ruckuswireless.com/software/3463-ruckus-unleashed-ap-200-12-mr1-refresh1-software-for-r710

200.6.10.1.308 version: https://support.ruckuswireless.com/software/1686-ruckus-unleashed-ap-200-6-10-1-308-ga-software-for-r710

Regards,
Sarita Shekhar | CCNA | CWNA
Staff Technical Support Engineer,
https://support.ruckuswireless.com/contact-us