topic Ruckus AP won’t stay powered on – lights turn on briefly, then shut off in RUCKUS Support for Lennar Homes

Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

leopnascimento — Mon, 09 Jun 2025 13:32:07 GMT

Hi,
I have a Ruckus ICX7150-C12P-2X1G Switch installed in my Lennar home that recently stopped working. When I plug it in, the lights briefly turn on and then shut off completely. After that, the device does not power back on.

Here’s what I’ve tried so far:

Verified the power source (tested both PoE and direct power adapter);

Performed both hardware reset and factory reset procedures;

Disconnected and reconnected all cables;

Tried accessing the web interface via default IP, but the device does not appear on the network.

None of these steps worked. The behavior is consistent: lights turn on for and instantly goes off, and the unit becomes unresponsive. It seems like a hardware or something else.

Has anyone experienced something similar or have any additional troubleshooting suggestions? Otherwise, I believe I may need a replacement unit.

Thanks in advance!

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

pinky_ruckus — Mon, 09 Jun 2025 13:49:05 GMT

Hi @leopnascimento ,

Greetings!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

From the case description, I understand that your Ruckus Switch is not working and unresponsive.

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

Please refer to the below pictures as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

leopnascimento — Tue, 10 Jun 2025 01:26:44 GMT

Hi, I just uploaded the video with the problem.
Thank you.

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

pinky_ruckus — Wed, 11 Jun 2025 13:01:25 GMT

Hello @leopnascimento ,

Thank you for your response.

I have reviewed the picture you shared via Google Drive.

Could you please share a video showing the ICX-7150-C12P Switch being plugged into a working power outlet, along with the status of the indicator lights on the switch?

Please let us know if you have any queries in this regard.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

leopnascimento — Wed, 11 Jun 2025 13:45:20 GMT

I'm not sure what do you mean. This is a working power outlet in the video, and this is exactly the problem, the status of the indicator lights on the switch is not working.
On the video, you can see that the lights goes on and off quickly. That is exactly the problem of my switch.

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

pinky_ruckus — Wed, 11 Jun 2025 14:14:52 GMT

Hello @leopnascimento ,

Thank you for the response.

We noticed that the Google Drive link contains only an image, and the video was not included.

Kindly update us after sharing the video so that we could proceed further.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

leopnascimento — Wed, 11 Jun 2025 14:29:27 GMT

ah, got it.
done. can you check again, please?

Re: Ruckus AP won’t stay powered on – lights turn on briefly, then shut off

pinky_ruckus — Wed, 11 Jun 2025 15:52:08 GMT

Hello @leopnascimento ,

Thank you for sharing the video.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up even after connecting it to working power outlet, and when plugged in, all lights are off. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.