topic Re: Yellow lights on ruckus unit in RUCKUS Support for Lennar Homes

Yellow lights on ruckus unit

wxm2026 — Sun, 25 May 2025 18:48:52 GMT

Hi!

We live in a Lennar community and had a really bad storm recently. Our Ruckus unit failed so I purchased a new one. The lights are back on but the Ethernet connect to the Ruckus unit started flashing yellow. I switched out the Ethernet cables and it is still flashing yellow. The power to the access points is back and while we can connect to them, it doesn’t connect to the internet. See attached for picture on the Ruckus unit. Any suggestions? Thanks for the help!

Re: Yellow lights on ruckus unit

Imran_ruckus — Mon, 26 May 2025 12:40:45 GMT

Hi @wxm2026

Greetings!!!

Thank you for reaching out to the RUCKUS Lennar Home Community.

We appreciate your patience and understanding as we work to resolve the issues you are experiencing with your RUCKUS setup.

We apologize for any inconvenience this has caused and are committed to assisting you promptly.

Please note that the warranty is covered for the Lennar RUCKUS Switch if it's not recoverable with troubleshooting.

To better assist you, could you please provide the following information:
1. When your switch is connected to the outlet, do you observe any illuminated lights (amber or green)? Kindly describe which lights are visible. Additionally, please provide a photo showing the status of the lights and the full switch panel with cable connections to the switch ports.

2. Is your internet connection from the ISP stable and functioning? You can verify this by connecting to your local router's Wi-Fi or through an ethernet cable from the router to a laptop/PC.
3. How many access points are currently connected to the switch? Please describe the status of the lights on the access points. Similarly, include a photo showing the access points' light status.

Please log into your RUCKUS Account before uploading these photos/screenshots.

Please help me with all the queries, and should you have any further questions or concerns, feel free to reach out.

We appreciate your cooperation and look forward to resolving this matter for you promptly.

Best regards,

Imran Sanadi
RUCKUS Lennar Home Community

Re: Yellow lights on ruckus unit

wxm2026 — Tue, 27 May 2025 14:14:29 GMT

Thanks Imran. See attached for pictures of the repeater boxes and the Ruckus unit. To answer your question, yes I can connect to the internet in the router but just not via the repeater boxes.

Re: Yellow lights on ruckus unit

Imran_ruckus — Tue, 27 May 2025 14:22:43 GMT

Thank you for your response and the update.

Based on the picture you shared, it appears that the Blue cable from your ISP router or Access Point is connected to the incorrect port on the RUCKUS ICX-7150-C12P Switch. The cable should be connected to one of the 1-12 ports on the switch (please refer to the screenshots below). Kindly unplug the cable and reconnect it to the appropriate port. Afterward, please reboot the ISP router by unplugging and plugging it back into the power outlet. Once done, check your internet connection.

Please let me know how it goes, and feel free to reach out if further assistance is needed.

Thank you again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Re: Yellow lights on ruckus unit

Imran_ruckus — Thu, 29 May 2025 12:28:47 GMT

Hi @wxm2026

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Re: Yellow lights on ruckus unit

wxm2026 — Thu, 29 May 2025 13:13:04 GMT

Hi! I haven’t had a chance to try this solution since I’m out of town. I’ll be back this weekend and can try at that time.

Re: Yellow lights on ruckus unit

Imran_ruckus — Thu, 29 May 2025 13:32:52 GMT

Hi @wxm2026

Thank you for your response and the update.

Please do keep me informed as things progress.

Thanks again for your continued patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: Yellow lights on ruckus unit

wxm2026 — Thu, 29 May 2025 21:34:46 GMT

Hi I’m Bach home and shifted the blue plug as you recommended and restarted things. This is what the bottom of the box looks like now and the repeaters are completely off with no lights on.

Re: Yellow lights on ruckus unit

Imran_ruckus — Fri, 30 May 2025 12:32:18 GMT

Hi @wxm2026

Greetings!

Thank you for your response and the update.

Kindly perform a hard reset on the RUCKUS ICX-7150-C12P Switch multiple times until the SYST LED turns green.

For detailed instructions, please refer to the following RUCKUS Lennar Knowledge Base self-help article:
https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Process-for-performing-a-physical-factory-reset-hard-reset-on/ta-p/80783

Please let me know the outcome after performing the resets.

Thank you once again for your patience and understanding.

Best regards,
Imran Sanadi
RUCKUS | Lennar Home Community Support

Re: Yellow lights on ruckus unit

wxm2026 — Sun, 01 Jun 2025 21:45:58 GMT

Hi, I reset it a couple of times and seeing these lights. Still no internet from the repeater boxes.

Re: Yellow lights on ruckus unit

Imran_ruckus — Mon, 02 Jun 2025 12:34:44 GMT

Hi @wxm2026

Greetings!!!

Thank you for your recent correspondence and update.

We may need to check some configurations of your RUCKUS ICX-7150-C12P Switch to troubleshoot this issue.

To proceed with troubleshooting the issue, please follow the steps outlined below to access the Command Line Interface (CLI) and provide the necessary command outputs:

1. First, identify the current IP address assigned to the switch ICX-7150-C12P by your local router. You can use an IP scanner tool to easily locate the switch's IP address on your network. Here is a guide on how to perform this using the IP Scanner free application:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-of-the-RUCKUS-Devices-Switch-and-APs/ta-p/77863

2. Once you have identified the IP address of the switch, proceed to access the Command Line Interface (CLI) of the RUCKUS ICX-7150-C12P switch. Here is a guide on how to access the CLI:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-access-the-Command-Line-Interface-CLI-of-the-RUCKUS-ICX/ta-p/74450

If you can access the Command line, the prompt should look like below:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

3. After successfully accessing the CLI, please execute the following commands and provide the outputs:

enable

show version

show flash

show inline power

show inline power detail

show interface brief

Please share the command outputs or screenshots if you encounter any issues or errors during these steps.

Feel free to reach out if you have any questions or require further assistance.

Thank you for your cooperation and patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

Re: Yellow lights on ruckus unit

Imran_ruckus — Wed, 04 Jun 2025 13:07:26 GMT

Hi @wxm2026

Greetings!!!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Thank you.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Re: Yellow lights on ruckus unit

wxm2026 — Wed, 04 Jun 2025 14:30:12 GMT

Hi! Before doing the above, I tried a hard reset again and that seems to have solved the issue. If things change, I’ll let you know!

Re: Yellow lights on ruckus unit

Imran_ruckus — Wed, 04 Jun 2025 15:13:03 GMT

Hi @wxm2026

Thank you for the response.

Great!!! Good to know that the issue is now resolved.

We appreciate your time and patience on this case.

Thank you again for contacting RUCKUS Lennar Home Community, and feel free to contact us for future queries.

Have a great day ahead!!!

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.