topic Re: Factory Reset AP - Version Not Supported on Setup in RUCKUS Support for Lennar Homes

Factory Reset AP - Version Not Supported on Setup

willrob — Wed, 14 May 2025 23:46:22 GMT

Hello,

I recently purchased a Lennar home and the previous owner had their Ruckus ICX-7150-C12P setup with two APs in the house.
They did not leave the passwords, so I factory reset the master AP and was able to get the new Configure.Me-xxxx to show up.
However, when I try and use the Unleashed application to set up it says “AP Version Not Supported. Please upgrade your AP”

What does this mean and how can I go about fixing it?

Many thanks,

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Thu, 15 May 2025 13:17:07 GMT

Hello @willrob ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you have purchased a new Lennar home and trying to set up the Ruckus network.

Please refer to the below RUCKUS Lennar Knowledge Base self-help article describing the setup process.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/RUCKUS-Lennar-Home-devices-Connectivity-Setup-and-Configuration/ta-p/96170

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Factory Reset AP - Version Not Supported on Setup

willrob — Thu, 15 May 2025 14:26:23 GMT

Hello Pinky,

Thank you for the detailed guides, I was able to get a factory reset off the Master AP (the other one I unplugged), and began the new setup process in the Unleashed application. However when I connect to the Configure.Me-xxxx network and press “Start” I see the following error notification? It does not go to the next step of setting up the IP / LAN name etc.

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Thu, 15 May 2025 15:00:02 GMT

Hello @willrob ,

Thank you for the response.

Could you please confirm if you are trying to upgrade the firmware version through Ruckus Unleashed app?

I would request you to please upgrade the Unleashed on a Laptop web browser using Mozilla FireFox web browser.

Once you login to the AP through web browser, please upgrade the AP to the recommended version.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the Ruckus AP to a recommended version 200.15.6.12.304

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Upgrade-process-of-the-RUCKUS-Unleashed-R510-Access-Points-to-a/ta-p/75029

After upgrading all Access Points, uninstall the current Unleashed application and install the updated version. Please try to login again and check the version.

Please let me know if that works. Should you have any questions or require further assistance, please do not hesitate to contact us.

Thank you for your patience and cooperation.

Best regards,

Pinky Rajendran
RUCKUS Lennar Home Community

Re: Factory Reset AP - Version Not Supported on Setup

willrob — Thu, 15 May 2025 15:46:26 GMT

Hello Pinky,

Thank you for the guide. I was getting the error on the Unleashed App, and am now attempting to upgrade via Online on my laptop through FireFox. However, the URL provided in the video does not seem to work?

Do I need to be connected to the internet via an AP in order for that admin page to pop up? I am currently connected to the Internet Provider’s router WiFi while I try and sort out setting up the APs for the house, as they are currently not connected to the internet and seem to require firmware upgrade.

Does this mean I will need to upgrade locally / manually with a laptop per the video?

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Thu, 15 May 2025 17:45:51 GMT

Hello @willrob ,

Thank you for the response.

Yes, The internet should be connected via Access point for the admin page to pop up.

I would request you to please upgrade the Unleashed on a Laptop web browser using Mozilla FireFox web browser.

After upgrading all Access Points using the guide mentioned in the previous post, uninstall the current Unleashed application and install the updated version. Please try to login again and check the version.

Please let me know if that works. Should you have any questions or require further assistance, please do not hesitate to contact us.

Thank you for your patience and cooperation.

Best regards,

Pinky Rajendran
RUCKUS Lennar Home Community

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Mon, 19 May 2025 15:09:48 GMT

Hello @willrob ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Wed, 21 May 2025 13:45:44 GMT

Hello @willrob ,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Fri, 23 May 2025 14:46:08 GMT

Hi @willrob ,

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community

Re: Factory Reset AP - Version Not Supported on Setup

willrob — Fri, 23 May 2025 14:47:45 GMT

Hello Pinky,

Sorry for the delay. This has been resolved. Thank you

Re: Factory Reset AP - Version Not Supported on Setup

pinky_ruckus — Fri, 23 May 2025 15:07:50 GMT

Hello @willrob ,

Thank you for sharing the response.

We are glad to know that the issue is resolved.

Please feel free to contact us if there are any issues in this regard in future.

Thank you for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.