topic Re: Stand alone modem in RUCKUS Support for Lennar Homes

Stand alone modem

D1 — Wed, 30 Nov 2022 23:39:27 GMT

Does a stand alone modem not work with the ruckus

Recover.me

D1 — Wed, 30 Nov 2022 23:27:37 GMT

Password to login is incorrect. Tried hardwired to ICX cannot gain access to change password

Re: Recover.me

Yarenis — Thu, 01 Dec 2022 00:56:31 GMT

Hi @D1

are you a Lennar home Client? If that is the case, please test the next set of passwords:

Usernames: Passwords:

admin sp-admin

super Lennar

lennar

ruckus

Ruckus!

Ruckus1

admin

password

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired

Re: Stand alone modem

Yarenis — Thu, 01 Dec 2022 01:02:03 GMT

Hi @D1

No, For Lennar home clients we recommend using a router connected to the ICX 7150 Switch in order to run the next important protocol: NAT (to convert the private communication in your network to the Internet) and DHCP to provide IP addresses to the devices connected in your network) including the same ICX 7150 Switch, now we can run DHCP from the Switch but not NAT.

Note: for more information about possible Lennar homes set up, check the next guide:

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired