Ruckus ICX 7150-C12P

TonyNegreiros — Tue, 29 Nov 2022 18:06:09 GMT

Ruckus is working as a access point it need to be setup as a router

Re: Ruckus ICX 7150-C12P

Yarenis — Tue, 29 Nov 2022 18:22:40 GMT

r the Lennar home setup, the Switch is used as a Switch, its job will be to communicate all the devices connected to your ISP router, now the Switch comes with a routing code image however it is capable of routing, but it cannot run the protocol called NAT, so it will not be able to convert private IP addresses to public addresses, so this is the reason for the Lennar home configuration, it is required that the ISP router is connected to the ICX 7150 Switch in order to communicate everything connected to it Switch to the Internet.

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

Best regards,

Yarenis Hernández

Technical Support Engineer | L2 TAC Wired

topic Re: Ruckus ICX 7150-C12P in RUCKUS Support for Lennar Homes

Ruckus ICX 7150-C12P

Re: Ruckus ICX 7150-C12P