topic Re: WI-FI Replicator Failure in RUCKUS Support for Lennar Homes

WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 15:43:30 GMT

WI-FI Replicator Failure

I have already checked the modem and it is working correctly. I believe I am having a problem with the signal replication inside the house.

It is as if the replication is failing or is too slow or not sending 100% of the information.

This started after a power outage due to a storm.

We have already restarted all the equipment (modem and Wi-Fi replicator), but the problem persists.

Re: WI-FI Replicator Failure

pinky_ruckus — Tue, 01 Apr 2025 16:05:06 GMT

Hi @MK ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your Ruckus setup is not working after the power outage.

Could you please let us know the answers to the below queries to assist you better?

1) On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

2) May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let us know the answers to ALL the above queries or let us know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 16:35:30 GMT

Hi Pinky Rajendran

I can't properly understand all you asked, but these are the pictures I took. My understand is that I have two Access Point.
I appreciate your help.switchaccess point 1access point 2

Re: WI-FI Replicator Failure

pinky_ruckus — Tue, 01 Apr 2025 16:52:18 GMT

Hello @MK ,

Thank you for sharing the pictures.

To proceed further, we would need to check few configurations of the switch.

To check this, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find the IP Address of the RUCKUS Devices (Switch and APs) using IP Scanner free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-of-the-RUCKUS-Devices-Switch-and-APs/ta-p/77863

Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-access-the-Command-Line-Interface-CLI-of-the-RUCKUS-ICX/ta-p/74450

If you can access the Command line should look like this:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

Once you login to CLI, please enter the below commands and share the output.

Note: Hit Enter to accept each command

enable

show version

show flash

show inline power

show inline power detail

show interface brief

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again. We appreciate your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 17:44:19 GMT

Hi Pinky Rajendran

Unfortunately I was able to go up to the LanScan and find the IP. I could see two IP with Ruckus name. The first listed do not have a hostname. For the second listed, the hostname is "ruckus-unleashed.attlocal.net" .

I was not able to proceed with the "command line".
The browser does not open the page, once it is not properly connected to the internet, maybe?

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 18:22:35 GMT

I was able to open the terminal at Mac. When I type enable, it shows a list of words and the only common word is "enable".

Re: WI-FI Replicator Failure

pinky_ruckus — Tue, 01 Apr 2025 18:33:02 GMT

Hello @MK ,

Thank you for sharing the response.

I understand that you are using Mac laptop and you can access the terminal in the Mac laptop to login to Switch.

Once you open the terminal, please follow the below commands as mentioned in the below screenshot.

nc <IPAddress of the device> 23

Example: nc 192.168.1.182 23

If you can access the Command line should look like this:

????telnet@ICX7150-12P Switch>

Once we get the above prompt, we can execute the required commands as shared in the previous post and share the screenshot to check the configurations on the Switch.

Please let us know if you have any queries in this regard.

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 18:39:35 GMT

Please, I need help here! I need to work!

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 18:41:21 GMT

I used this option too, and nothing happens. any thing show on the screen

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 18:47:48 GMT

After entering the command as you informed, the screen remains static for a minute and then the username reappears to type again.

Re: WI-FI Replicator Failure

pinky_ruckus — Tue, 01 Apr 2025 19:04:04 GMT

Hello @MK ,

Thank you for the response.

I understand that you are unable to access terminal through Telnet option.

Could you please confirm if you were able to access the GUI of the Switch using Switch IP address through the web browser?

Thank you for your patience and understanding.

Regards,

Pinky Rajendran

RUCKUS Lennar Home Community

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 19:19:11 GMT

I have no ideia what you are talking about.

Re: WI-FI Replicator Failure

pinky_ruckus — Tue, 01 Apr 2025 19:42:14 GMT

Hello @MK ,

Thank you for the response.

Really apologize for the confusion.

To proceed further, we need to check few configurations on the Switch.

We would need to find the IP address of the switch and then use the IP address to login to GUI of the switch using the web browser.

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-of-the-RUCKUS-Devices-Switch-and-APs/ta-p/77863

Once we identify the IP address of the Switch proceed to access the RUCKUS ICX-7150-C12P Switch using a Web Browser.

Please click on Login option and try to access the Switch GUI using the login credentials.

Please let us know once you log in to the Switch GUI using the browser.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: WI-FI Replicator Failure

MK — Tue, 01 Apr 2025 20:34:08 GMT

Can we talk on the phone? I need a quick solution.
Is the equipment working or can I trow it on the garbage?

Re: WI-FI Replicator Failure

pinky_ruckus — Wed, 07 May 2025 16:01:30 GMT

Hello @MK,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

I would like to know if you require further assistance since our last correspondence. Should you have any questions or if the status of your case has changed, please let me know by responding to this post.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: WI-FI Replicator Failure

pinky_ruckus — Fri, 09 May 2025 13:48:13 GMT

Hello @MK,

Greetings!

This is a follow-up in reference to the case you have opened in the Ruckus Lennar Support Community.

Please feel free to contact if you have any further concerns regarding the same.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: WI-FI Replicator Failure

pinky_ruckus — Mon, 12 May 2025 13:32:08 GMT

Hi @MK,

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

If we do not receive a response from you within 24 hours from the timestamp of this message, your case will proceed to closure.

Thank you.

Best regards,
Pinky Rajendran

RUCKUS Lennar Home Community