topic Re: ICX7150-C12P Not Powering On in RUCKUS Support for Lennar Homes

ICX7150-C12P Not Powering On

waneugene — Mon, 31 Mar 2025 16:16:39 GMT

My ICX-7150-C12P is not powering on. I found a few posts with others having the same issue and followed the same troubleshooting steps of performing a hard reset and switching power sources. The switch still does not power on.

Re: ICX7150-C12P Not Powering On

pinky_ruckus — Mon, 31 Mar 2025 17:13:07 GMT

Hi @waneugene ,

Greetings!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

From the case description, I understand that your Ruckus Switch is not turning on even after performing the reset.

Kindly shoot a video similar to the EXAMPLE Video provided in the link.

In the video, please ensure to capture the following:

1. Show the plug of the ICX-7150-C12P Switch being connected to a working outlet.

2. Simultaneously, display the light status on the switch.

Please refer to the below pictures as an example.

Please use the below link to upload a VIDEO:

https://drive.google.com/drive/folders/16lG-j0MSKzjqBJSY4rsgh4myUlseA9bz?usp=sharing

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: ICX7150-C12P Not Powering On

waneugene — Tue, 01 Apr 2025 06:56:28 GMT

Hi Pinky,

Thank you for the instructions. I have uploaded the video. Let me know if that will suffice.

Re: ICX7150-C12P Not Powering On

pinky_ruckus — Tue, 01 Apr 2025 13:40:28 GMT

Hello @waneugene ,

Thank you for sharing the video through the link.

Based on the troubleshooting done, your ICX-7150-C12P Switch is not powering up even after performing reset and connecting it to working power outlet, and when plugged in, all lights are off. However, the failure persists. This Switch unit Should be RMA (Return Merchandise Authorization) in simple words replacing it.

Feel free to contact us via chat, comment you already have a post, copy the link from the post (URL), and paste it into the chat to start the unit replacement.

Please follow the steps as shown in the below example:

As shown in the below picture, copy the link and share it via chat from the link provided:

The below link is to contact us by chat (only)

https://support.ruckuswireless.com/contact-us

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.