Re: No Command Line in Putty

SH — Fri, 28 Feb 2025 02:26:44 GMT

Hi Imran,

I received the replacement switch and have powered it on. I’ve connected it to one WAP and confirmed that POE is being provided to the WAP. Are there instructions you can provide to set up the wireless network? I don’t want to do anything preemptively to mess anything up. Thank you again for your help.

Re: No Command Line in Putty

Imran_ruckus — Fri, 28 Feb 2025 12:26:26 GMT

Hi @SH

Greetings!

Thank you for your response and the update.

You may reconnect the cables as they were previously plugged into the old RUCKUS ICX-7150-C12P switch. This setup should function properly.

However, for detailed guidelines on connecting RUCKUS devices, please refer to the following RUCKUS Lennar Knowledge Base article:

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/RUCKUS-Lennar-Home-devices-Connectivity-Setup-and-Configuration/ta-p/96170

If you require any further assistance, kindly raise a new post, adding this post's link as a reference, as this thread will be closed due to the completion of the RMA process.

Thank you once again for your patience.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

topic Re: No Command Line in Putty in RUCKUS Support for Lennar Homes

Re: No Command Line in Putty

Re: No Command Line in Putty