7150-C12P amber syst light with no console

chris_hayden — Sat, 22 Jun 2024 00:37:18 GMT

So like many others I had a power spike and my backup shut down before it was resolved. I found my 7150 with the orange light of doom. Rebooting I was able to get into it once and connect via the RJ console port and perform a factory reset. It worked fine until I removed power to put it back in the rack and then the syst light went orange again and despite 20+ factory resets, it will not come back up and I cannot console into it.

Tried different USB C cables with different clients. Tried the RJ to USB cable I was able to use in the past. Using 9600,8,1 none and all I get is a blank console cursor like it's not even trying to boot up at all.

Had anyone had this issue or know how I can get my console back to restore the software? I have went through the forums and have yet to find a fix.

Can I get in through the header on the main board.

Thank you!

Re: 7150-C12P amber syst light with no console

Imran_ruckus — Mon, 24 Jun 2024 14:40:34 GMT

Hello @chris_hayden

Thank you for reaching out to the RUCKUS Community forums.

Could you kindly confirm if this setup pertains to a Lennar Homes RUCKUS setup?

Your confirmation would greatly assist us in providing you with the appropriate support.

Thank you once again.

Best regards,

Imran Sanadi
RUCKUS Lennar Home Community

topic Re: 7150-C12P amber syst light with no console in RUCKUS Support for Lennar Homes

7150-C12P amber syst light with no console

Re: 7150-C12P amber syst light with no console