topic Ruckus ICX FastIron 08.0.90d upgrade to 8095G in RUCKUS Support for Lennar Homes

Ruckus ICX FastIron 08.0.90d upgrade to 8095G

daddygoat — Thu, 30 May 2024 16:12:58 GMT

Not knowing if my ICX 7150 running 8090d is non-UFI or not, and instructions to upgrade state info about the Images folder needing to be copied over to a USB to upgrade.... Do i need to include the older image file of 8090d to proceed to upgrade to the 8090F and then ultimately 8095G or can I just go directly to 8095G?

Re: Ruckus ICX FastIron 08.0.90d upgrade to 8095G

Imran_ruckus — Thu, 30 May 2024 16:45:36 GMT

Hi @daddygoat

Greetings!!!

Greetings from RUCKUS Lennar Home Community.

Thank you for reaching out to us.

I understand that you are seeking assistance with upgrading your RUCKUS ICX-7150-C12P Switch from version 08.0.90d to version 08.0.95g.

Before we assist you, could you please share the below mentioned command outputs?

Once you have successfully logged into the CLI (Command Line Interface), kindly enter the following commands and share the output with us:

enable

show version

show flash

Please feel free to reach out if you have any further questions or require additional assistance.

Thank you for your cooperation and patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community

Re: Ruckus ICX FastIron 08.0.90d upgrade to 8095G

Imran_ruckus — Fri, 31 May 2024 20:22:48 GMT

Hi @daddygoat

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Your prompt response would be greatly appreciated.

Thank you for your attention to this matter.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Re: Ruckus ICX FastIron 08.0.90d upgrade to 8095G

Imran_ruckus — Wed, 05 Jun 2024 14:18:08 GMT

Hi @daddygoat

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Your prompt response would be greatly appreciated.

Thank you for your attention to this matter.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community

Re: Ruckus ICX FastIron 08.0.90d upgrade to 8095G

Imran_ruckus — Fri, 07 Jun 2024 21:01:02 GMT

Hi @daddygoat

Greetings!

I trust this message finds you well.

I kindly request an update on the status of the issue so that we may proceed further with resolving it.

Your prompt response would be greatly appreciated.

Thank you for your attention to this matter.

Best regards,
Imran Sanadi
RUCKUS Lennar Home Community