topic Re: Ethernet not working and slow 2.4g in RUCKUS Support for Lennar Homes

Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 16:03:55 GMT

I am having an issue with my access point. I have a flashing yellow light on far left for the 5g, with a green light next to the yellow one and the two far right ones. The middle light is off. Also, my ethernet ports throughout the house are not working. I have been running speed tests that seem to be fine for the 5g but the two 2.4g are running very slow compared to before. There was some bad weather a few weeks ago that may have caused the problems I am having.

I have the one R510 Unleashed and ICX 7150-2X1G switch. Can you assist me?

Re: Ethernet not working and slow 2.4g

pinky_ruckus — Tue, 23 Apr 2024 16:37:39 GMT

Hi @dewell_fears ,

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you are facing intermittent Internet connectivity on your RUCKUS setup.

Could you please log into the unleashed system and share the screen shot showing the below details?

Please share the requested information and let us know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 17:06:47 GMT

Can you give me the instructions for logging into the Unleashed system? Is there a web address?

Re: Ethernet not working and slow 2.4g

pinky_ruckus — Tue, 23 Apr 2024 18:17:14 GMT

Hello @dewell_fears ,

Thank you for the response.

I would request you to please login to your Unleashed system on a web browser using the Master AP IP Address or https://unleashed.ruckuswireless.com/ and share the screenshot after pressing the Switch option.

If you can’t access using the above link and don’t know the IP Address of the Access Points. Please refer to the below guide to find the IP Address of the Access Point to get the requested information.

How to find the IP Address of the RUCKUS Devices (Switch and APs) using IP Scanner free applications

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-find-the-IP-Address-of-the-RUCKUS-Devices-Switch-and-APs/ta-p/77863

You should see the below-Unleashed dashboard after finding the IP Address of the AP. Try to log in

Please share the requested information and let us know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 20:56:16 GMT

Re: Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 20:57:15 GMT

Re: Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 20:59:36 GMT

Re: Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 21:05:06 GMT

I marked it as accepted by mistake. Can you help me because I am completely loss with this.

Re: Ethernet not working and slow 2.4g

pinky_ruckus — Tue, 23 Apr 2024 22:00:09 GMT

Hello @dewell_fears ,

Thank you for the response and the information shared.

Based on the information you provided, it appears that the switch information is showing as expected when compared to Unleashed. It is necessary to perform a factory reset on the access point and establish a new Wi-Fi network/SSID.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to factory reset the AP and create new Wi-Fi network.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/Factory-reset-process-of-the-RUCKUS-R510-Access-Points-for/ta-p/73964

Please follow the article and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.

Re: Ethernet not working and slow 2.4g

dewell_fears — Tue, 23 Apr 2024 23:02:23 GMT

The ethernet connections are down though. Why aren't those plugs working coming from the switch? I've tried to connect the TV and android box to the ethernet outlet but no signal is coming through. Also, can you tell me if a firmware update is needed?

Re: Ethernet not working and slow 2.4g

pinky_ruckus — Wed, 24 Apr 2024 14:29:17 GMT

Hello @dewell_fears ,

Greetings!

Thank you for sharing the information.

I would suggest you to upgrade the firmware of the Switch since the Switch is on the older version.

Please follow the below RUCKUS Lennar Knowledge base self-help article which will help you to upgrade the Switch firmware version to the recommended stable version.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-7150-C12P-from-Non-Unified-Forwarding/ta-p/71353

Note: Please ignore 8080f from the guide and directly upgrade to the 8095g(recommended version)

Please follow the article and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Pinky Rajendran

RUCKUS Lennar Home Community.