How to improve your 2.4 GHz signal

Yarenis — Wed, 26 Oct 2022 16:08:30 GMT

How to improve your 2.4 GHz signal

1: select the recommended channels

From Unleashed Dashboard page: unleashed.ruckuswireless.com

Tap Access Point>Edit> Radio 2.4 GHz>uncheck all channel except for 1,6 and 11

2: Change the channelization

Tap Access Point>Edit> Radio 2.4 GHz>Channelization>choose between auto,20 or 40

20 lower range of coverage it’s the best option to avoid interference

40 Only use it if your end devices are far away from the Access Point, for example you have one AP for a two-floor house.

3: Create separate SSID with the 2.4 GHz signal only

This will help to control the devices that you want to connect to the 2.4 GHz signal only such cameras

Legacy devices or any device which is not capable to run 5 GHz signal

Tap Wi-Fi Networks>Create>fill all the data>show advance options>Radios Control>Enable WLAN on dropdown menu>choose 2.4 GHz only>OK

topic How to improve your 2.4 GHz signal in RUCKUS Support for Lennar Homes