topic Re: How to unlink 2 R310 HELP please in RUCKUS Support for Lennar Homes

How to unlink 2 R310 HELP please

margio_acevedo — Fri, 07 Jan 2022 13:24:20 GMT

Hi all and happy new year. Best on this 2022.

I have 2 R310 connected on my same network (one as master, the other as slave). Is there anyway I can disassociate or un-link my slave from the master? I want them to work individually. I want to be able to manage them apart from each other.

Any helps would be greatly appreciated.

Re: How to unlink 2 R310 HELP please

sarita_shekhar — Fri, 07 Jan 2022 13:35:37 GMT

Hello @margio_acevedo,

A very happy new year to you!!

If you want the AP's to work individually on the same local subnet/network, I suggest upgrading the AP's to the standalone version.

However, if you want the Unleashed firmware, then you need to reset the AP (member AP) and move it to another network/VLAN (no inter-VLAN routing between the 2 networks).

In case, you choose to switch to standalone firmware, below is the direct download link:-

https://support.ruckuswireless.com/software/2791-ruckus-solo-access-point-110-0-0-0-2014-ga-refresh2-software-release-r310

AP Reset procedure:-

-- Use a paperclip, press and hold the reset pinhole at the back panel of the AP for about 30 - 40 secs.

Hope this answers your query.

Regards,
Sarita Shekhar | Senior Technical Support Engineer,

CWNA/CCNA
https://support.ruckuswireless.com/contact-us