topic Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?) in RUCKUS Support for Lennar Homes

Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

mb007 — Wed, 13 Mar 2024 21:25:12 GMT

Hi Imran, I SO hope you can help me! I keep getting kicked around and I hope this is where I can get help.We switched internet service providers, and now the panoramic wifi boxes (indoor APs?) don't send signal.

It was working fine with the COX modem plugged into it. But now it doesn't with the AT&T one plugged in.

I look forward to hopefully hearing from you!

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

Imran_ruckus — Thu, 14 Mar 2024 12:47:28 GMT

Hi @mb007

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working, with no Internet to the Access Points.

Could you please let us know the answers to the below queries to assist you better?

1. Was this working before or is it a new installation? If it worked before, was there any power outage before you started facing this issue?

2. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

3. Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from the Router to a laptop/PC).

4. May I know if you have RUCKUS Access Points connected to the Switch? If yes, could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please login to the RUCKUS account and you can upload the image.

Please let me know the answers to ALL the above queries and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

mb007 — Thu, 14 Mar 2024 20:04:30 GMT

Hi Imran,

Thanks for getting back to me!

1. Was this working before or is it a new installation? If it worked before, was there any power outage before you started facing this issue?

It came installed with the home when we bought it new. It wasn't a power outage issue. We disconnected it from the COX device and plugged in the new AT&T router. But now there is no signal from the RUCKUS to connect to.

2. All lights are on and green.

3. The Internet Connection from the Internet Service Provider (ISP) is stable and working.

4. Yes. 3 of them. The lights are green and flashing. Each one has a different amount of lights on. 1st floor has all but the "AIR" light on and flashing green. The 2nd floor has flashing green on the "PWR" and "CTL". and the 3rd floor has flashing green on the "PWR" only.

I look forward to you help and advice in this matter!

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

Imran_ruckus — Thu, 14 Mar 2024 20:19:14 GMT

Hi @mb007

Greetings!!!

Thank you for the response and the detailed information you shared.

As per the light status of the RUCKUS ICX-7150-C12P Switch and the R510 Access Points, they seem to be in a normal status.

As I see from the picture you shared, seems like the ethernet cable which is coming from the ISP’s (Internet Service Provider’s) Router or Modem/Router combo is plugged into the wrong port on the Switch panel. It must be plugged into any 1 in-12 ports as shown in the below screenshot. Please unplug the ethernet cable and plug it into the correct port. Reboot (Unplug and plug from the power outlet) your ISP Router and RUCKUS ICX-7150-C12P Switch once then try to connect to the Internet via Access Points.

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

mb007 — Thu, 14 Mar 2024 23:34:20 GMT

Hi Imran,

Thanks you for the reply and your instructions. Unfortunately, after following the steps as directed, I still can't connect. is the light from the ISP's cable supposed to be lit green as well? Just like the AP's?

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

Imran_ruckus — Fri, 15 Mar 2024 12:31:27 GMT

Hi @mb007

Greetings!!!

Thank you for the response and the update.

The light status of the Switch and Access Points are in a normal state.

If your ISP modem is directly connected to the ICX-7150-C12P Switch, it doesn’t work only with Modem.

The connection must be from a Router or Modem-Router combo device. Could you please confirm this once?

Please refer to the short guide link below about how to connect the devices as a reference:

Most common Setups for Lennar homes users:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

Imran_ruckus — Fri, 15 Mar 2024 20:48:38 GMT

Hi @mb007

Greetings of the day!!!

Hope you are doing good.

Could you please update on the status of the issue?

Please let me know if you have any queries in this regard.

Thank you.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

mb007 — Fri, 15 Mar 2024 22:36:04 GMT

Hi Imran,

Thank you very much for checking in! I appreciate it!

We are waiting for delivery of a wifi router this evening. Once received, I will attept to connect as instructed. I will follow up with the results.

Cheers!

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

mb007 — Sat, 16 Mar 2024 23:37:53 GMT

Hi Imran,

All is good and working now! Thank you very much for all your help!

Cheers!

Re: Main ICX-7150-C12P not sending signal to panoramic ceiling boxes (indoor APs?)

Imran_ruckus — Mon, 18 Mar 2024 12:45:16 GMT

Hi @mb007

Thank you for the response.

Great!!! Good to know that the issue is now resolved.

We appreciate your time and patience on this case.

Thank you again for contacting RUCKUS Lennar Home Community and feel free to contact us for future queries.

Did I answer your queries? If yes, hit the Kudos buttons and also accept the answers as Accepted solutions.

Have a great day ahead!!!

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.