reset

jbk3 — Sat, 24 Feb 2024 21:38:40 GMT

I performed a hard reset by pressing the reset on the R510

Red light cam on, then the green flashing,

My laptop network manager never recognized the "configure.me.xxxxxx"

Now the R510 is on green lights but orange for 5g

But I still can't logon because I couldn't rest the password.

John

Re: reset

Imran_ruckus — Mon, 26 Feb 2024 13:13:15 GMT

Hi @jbk3

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you are trying to set up your RUCKUS Access Points.

Are you able to see a Wi-Fi SSID broadcasted from your RUCKUS R510 Access Points and connect to the Internet with the same?

Please note, that Amber lights on 2.4G and 5G is a normal behavior.

If 2.4G and 5G lights are amber, it states that the connectivity is up and there are no devices/clients connected. When any device/client connects to the 2.4 or 5G radio the lights turn green. Please refer to the below link for more information about the light status of the RUCKUS R510 Access Point.

https://docs.commscope.com/bundle/unleashed-200.9-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

Please refer to the short guide link below about how to connect the devices as a reference:

Most common Setups for Lennar homes users:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lennar-homes-users/td-p/47106

Please check and let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

topic Re: reset in RUCKUS Support for Lennar Homes

reset

Re: reset