topic Re: Lennar Home Ruckus Switch Bad Software in RUCKUS Support for Lennar Homes

Lennar Home Ruckus Switch Bad Software

Jphilbin38 — Sun, 28 Jan 2024 22:26:16 GMT

Saw your thread on fixing the switch with a computer, usb c to port cable, downloading a terminal application and entering commands to determine what version is running and trying to make the spr primary. I entered in the code from your comment and got " error. No such file or directory.

Unable to find ufi image copy from please reload master with appropriate UFI image to proceed with flash flash copy.

Could you help me with this?

Re: Lennar Home Ruckus Switch Bad Software

Jayavidhya — Mon, 29 Jan 2024 13:20:51 GMT

Hi @Jphilbin38

Greetings of the day,

Thanks for the detailed description,

Please try to access the switch using the CLI method and check whether you are getting the same issue or not.

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-7150-12CP-Ruckus-Switch/td-p/46759

Once you gain access to the switch please share the output of the following commands.

enable

Show version

Show flash

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Lennar Home Ruckus Switch Bad Software

Jphilbin38 — Mon, 12 Feb 2024 00:42:44 GMT

ICX7150-C12 Router#enable
Incomplete command.
ICX7150-C12 Router#show version
Copyright (c) Ruckus Networks, Inc. All rights reserved.
UNIT 1: compiled on Sep 23 2019 at 00:00:25 labeled as SPR08090d
(32539748 bytes) from Secondary SPR08090d.bin (Non-UFI)
SW: Version 08.0.90dT213
Compressed Secondary Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compiled on Thu Jan 31 07:08:55 2019

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3841R0W7
Software Package: ICX7150_BASE_L3_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0
==========================================================================
UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module
==========================================================================
UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module
==========================================================================
1000 MHz ARM processor ARMv7 88 MHz bus
8192 KB boot flash memory
2048 MB code flash memory
1024 MB DRAM
STACKID 1 system uptime is 22 day(s) 1 hour(s) 19 minute(s) 3 second(s)
The system started at 00:19:39 GMT+00 Sat Jan 01 2000

The system : started=cold start

======================================================================================
=============== WARNING: FI image is not booted from UFI!!! ===============
====== Please download UFI image and reboot the system for full functionality ======
======================================================================================
ICX7150-C12 Router#show flash
Stack unit 1:
NAND Type: Micron NAND 2GiB (x 1)
Compressed Pri Code size = 28660224, Version:08.0.90dT211 (SPS08090d.bin)
Compressed Sec Code size = 32539748, Version:08.0.90dT213 (SPR08090d.bin)
Compressed Pri Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Compressed Sec Boot Code size = 786944, Version:10.1.15T225 (mnz10115)
Code Flash Free Space = 1260417024
ICX7150-C12 Router#

Re: Lennar Home Ruckus Switch Bad Software

Sgatjens — Mon, 12 Feb 2024 20:45:57 GMT

Hi @Jphilbin38

I can see that your unit is running the wrong code (router) instead the correct one (switch)

CLI output:

ICX7150-C12 Router>

you can solve it with the following commands:

enable

copy flash flash secondary

boot system flash secondary yes

You also can check this article for more information:

Fixing RUCKUS ICX-7150-C12P Switch Routing Code (SPR) issue using Command Line Interface (CLI)

Kind regards,

Sofia Gätjens

Re: Lennar Home Ruckus Switch Bad Software

Jphilbin38 — Mon, 12 Feb 2024 23:50:04 GMT

I tried that. And the secondary files are lost.

Re: Lennar Home Ruckus Switch Bad Software

Sgatjens — Tue, 13 Feb 2024 14:06:52 GMT

Hi @Jphilbin38

So in this case you will have to reimage the ICX, to do this you have to follow the same steps for the upgrade process:

How to perform an Upgrade via Web GUI (ICX7150 Switch)

How to Upgrade a Switch ICX-7150-C12P via TFTP

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

How to upgrade RUCKUS ICX-7150-C12P from Non-Unified Forwarding Image (UFI) to a stable UFI version

Kind regards,

Sofia Gätjens

Re: Lennar Home Ruckus Switch Bad Software

Jphilbin38 — Sun, 18 Feb 2024 01:39:49 GMT

I tried using the USB drive and console mobaxtrem to access the switch. The command" copy disk0 flash mnz10114.bin bootrom" doesn't work. Invalid input is my response.

Re: Lennar Home Ruckus Switch Bad Software

Sgatjens — Tue, 20 Feb 2024 14:01:12 GMT

Hi @Jphilbin38

Could you please share with me the command:
ICX7150-C12 Router#show flash
ICX7150-C12 Router#show version

Kind regards,

Sofia Gätjens