Another Rucku 7150 initialization help

hsabbagh — Tue, 30 Jan 2024 00:38:46 GMT

Hello I recently purchased a home and found a Ruckus switch with two ruckus unleashed devices mounted throughout the home. I cant seem to get in contact with anyone to help set up the device and the original homeowner never set it up.

I tried using Putty to activate the device but the commands i found online were not working so i went to update the firmware, i now cant seem to get the TFTPD server to upload the correct firmware even though its for the device.

im using copy tftp flash [IP ADDRESS] [filename:icx7xxx_poe_02.1.8.b004.fw] primary

but it keeps giving me this error: MySwitch#The code type 0 is not correct for the target hardware, abort!
File Type Check Failed

here is my current version:

MySwitch#show version
Copyright (c) 2017 Ruckus Wireless, Inc. All rights reserved.
UNIT 1: compiled on Nov 20 2018 at 00:09:55 labeled as SPS08080d
(25968884 bytes) from Primary SPS08080d.bin
SW: Version 08.0.80dT211
Compressed Boot-Monitor Image size = 786944, Version:10.1.14T225 (mnz10114)
Compiled on Thu Nov 15 12:59:22 2018

HW: Stackable ICX7150-C12-POE
==========================================================================
UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module
Serial #:FEK3815Q4C0
Software Package: BASE_SOFT_PACKAGE
Current License: 2X1G
P-ASIC 0: type B160, rev 11 Chip BCM56160_B0

Would LOVE some help getting this thing going because my router isnt able to spread wifi through the entire house.

Re: Another Rucku 7150 initialization help

Imran_ruckus — Tue, 30 Jan 2024 12:21:05 GMT

Hi @hsabbagh

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that you are trying to set up RUCKUS devices and upgrade the RUCKUS ICX-7150-C12P Switch to a stable version.

Please refer to the below RUCKUS Lennar Knowledge Base self-help guide for the upgrade process.

https://community.ruckuswireless.com/t5/RUCKUS-Lennar-Support-Knowledge/How-to-upgrade-RUCKUS-ICX-7150-C12P-from-Non-Unified-Forwarding/ta-p/71353

Please follow the upgrade process and let me know if you need help at any point during the process.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

topic Re: Another Rucku 7150 initialization help in RUCKUS Support for Lennar Homes

Another Rucku 7150 initialization help

Re: Another Rucku 7150 initialization help