topic Re: R320 PWR light solid Red in RUCKUS Support for Lennar Homes

R320 PWR light solid Red

Kabrah — Wed, 27 Dec 2023 21:50:14 GMT

POE Ethernet port light is green. PWR light on the front panel stays red. Unleashed app shows the AP as offline. I have tried unplugging the POE and plugging it back in with no success. I have also tried holding the reset button (45 seconds) using the handle loop wire that came in the box - PWR light continued to persist as red. I removed the AP and tried a different direct POE Ethernet cable with no success. Do you have any other suggestions?

Re: R320 PWR light solid Red

Imran_ruckus — Thu, 28 Dec 2023 12:45:35 GMT

Hi @Kabrah
Greetings!!!

Thank you for contacting RUCKUS Community forums.

Could you please let me know if this is a Lennar Home RUCKUS setup?

Please confirm.

Thank you again.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: R320 PWR light solid Red

Kabrah — Thu, 28 Dec 2023 13:34:32 GMT

Yes, this is a Lennar Home Ruckus setup.

Re: R320 PWR light solid Red

Imran_ruckus — Thu, 28 Dec 2023 13:47:24 GMT

Hi @Kabrah

Thank you for the response and the confirmation.

Please try connecting the RUCKUS Access Point to an external 12 VDC power adapter and check it separately without connecting to the Switch PoE port cable. (Please refer to the below screenshot). Usually, you will find the 12 VDC adapter connected to your ISP’s (Internet Service Provider’s) Router/Modem-Router combo device.

Please check the Access Point following the above process and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: R320 PWR light solid Red

Kabrah — Thu, 28 Dec 2023 13:51:14 GMT

Tried that solution and the PWR light remains constant red even after holding down the reset button for lengthy amount of time.

Re: R320 PWR light solid Red

Imran_ruckus — Thu, 28 Dec 2023 13:59:13 GMT

Hi @Kabrah

Thank you for the response and the update.

Could you please share a PICTURE showing the Access Point with its light status connected to a 12 VDC external power adapter with a working power outlet? (Please refer to the below picture as an example)

Please note: The below picture is just an example connected to a working power outlet with a RUCKUS ICX-7150-C12P Switch. Please use the Access Point in your picture in place of the Switch.

Please help me with the above query and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: R320 PWR light solid Red

Kabrah — Thu, 28 Dec 2023 14:17:37 GMT

See photos attached, with POE and Access point with steady red light.

Re: R320 PWR light solid Red

Imran_ruckus — Thu, 28 Dec 2023 14:23:16 GMT

Hi @Kabrah

Thank you for the response and the information.

I see from the pictures, your Access Point is not connected to the external power adapter. Please unmount the Access Point from the ceiling and connect it with an 12 VDC external adapter. (Please refer to the below pictures and process)

Physical Factory Reset of RUCKUS Access Point:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Physical-Factory-Reset-an-Access-Points-Ruckus/td-p/47056

Ruckus Unleashed Set-up using Web:

https://www.youtube.com/watch?v=j8I5aVwMNMg

Password recovery setup:

https://www.youtube.com/watch?v=sqnG8fupaLk

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.