topic Re: ICX7150 in RUCKUS Support for Lennar Homes

ICX7150

amitpok — Tue, 19 Dec 2023 05:46:14 GMT

I was trying to arrange the wires and after everything was done I plugged everything in its place. When I did that one green and one orange light were steady and there was no wifi signal. I looked into few posts and tried to reset, now all the lights are blinking orange with one steady green. Please help.

Re: ICX7150

Jayavidhya — Tue, 19 Dec 2023 12:59:02 GMT

Hi @amitpok

Greetings of the day,

Thanks for your response,

For better understanding of the issue we request you to share the image of the switch and the access points showing the LED status and the cable connections.

Here is where you can upload the image/photo :

you can also drag it to the chat.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: ICX7150

amitpok — Tue, 19 Dec 2023 19:21:22 GMT

Re: ICX7150

Jayavidhya — Tue, 19 Dec 2023 19:43:24 GMT

Hi @amitpok

Thanks for your response,

Based on the images you have shared it seems like your switch has green and amber lights on it which means that the switch is stuck in boot mode.

As you have already tried the factory resetting the switch and the switch is not responding to the factory reset, you need to perform the software recovery process,

Please read the guide carefully before start the steps.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

Ruckus ICX Recovery tutorial video

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

Note: after fixing the issue of the Switch been stuck in boot mode, please perform an upgrade to the code 08095g UFI and upgrade both partitions with the switching code file named SPS08095gufi.bin, so perform the software recovery using the code 08090k with the upgrade image file named SPS08090k.bin, then when the switch is back to normal upgrade to the file SPS08095gufi.bin for both partitions primary and secondary.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/m-p/47187

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community