topic Re: Ruckus in Lennar Home - Power Disconnects in RUCKUS Support for Lennar Homes

Ruckus in Lennar Home - Power Disconnects

Chelskylar — Tue, 17 Oct 2023 21:35:28 GMT

Home built in 2019. Ruckus only controls the ring doorbell camera in the house. Every other day the ruckus shuts off, therefore shutting off the ring doorbell. We are able to reboot the ruckus but what could be causing the ruckus to consistently turn off?

Re: Ruckus in Lennar Home - Power Disconnects

Imran_ruckus — Tue, 17 Oct 2023 23:11:32 GMT

Hi @Chelskylar

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

I hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I understand that your RUCKUS setup is not working, as it is expected to be.

This issue happens now and then after a power outage/spike due to an older version of the RUCKUS ICX-7150-C12P Switch which we can upgrade.

Could you please let us know the answers to the below queries to assist you better?

1. On your switch while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on. (Please refer to the below picture and share a picture of the same, showing the light status and the FULL Switch panel cable connections to the Switch ports)

2. Is your Internet Connection from the Internet Service Provider (ISP) stable and working? (You could check this by connecting to your local router Wi-Fi or from an ethernet cable from the Router to a laptop/PC).

3. May I know how many Access Points are connected to the Switch? Could you please let me know the light status on the Access Points? Any of these lights are on (Please refer to the below picture and share a picture of the same)

Please help us with pictures of your ICX-7150-C12P Switch showing the status of the lights and cable connections to the Switch ports. Also, light the status of Access Points.

Before uploading the photos please log in to the RUCKUS account and you can upload the image.

Please let me know the answers to ALL the above queries or let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Ruckus in Lennar Home - Power Disconnects

kdaytime — Thu, 19 Oct 2023 13:47:20 GMT

The same issue this user has described is happening to me as well. However, my RUCKUS device controls more than just the ring doorbell. Every couple days the RUCKUS device loses power, but if I unplug and plug back in, lights return and everything is on/back to normal.

Assuming I'll receive the same canned response to provide images, I will do this later today

Re: Ruckus in Lennar Home - Power Disconnects

Imran_ruckus — Thu, 19 Oct 2023 15:21:59 GMT

Hi @kdaytime

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well

As this case is raised by @Chelskylar

To avoid confusion with posts, you can create your own post with the above description of the network issue and what you've done so that we can guide you properly.

Thank you again for understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Ruckus in Lennar Home - Power Disconnects

Chelskylar — Thu, 19 Oct 2023 17:18:56 GMT

Good to know I’m not the only one. I’m going to my parents house to attend to it this weekend. So TBA

Re: Ruckus in Lennar Home - Power Disconnects

Imran_ruckus — Thu, 19 Oct 2023 19:17:06 GMT

Hi @Chelskylar

Greetings!!!

Thank you for the response.

Please share the requested pictures and information at your convenience as mentioned in my previous post.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Ruckus in Lennar Home - Power Disconnects

Chelskylar — Sun, 22 Oct 2023 00:01:28 GMT

Hello Imran,

Sorry for the delay.

2.Internet is stable

3. I'm not exactly sure what you mean by "Switch." The only piece of equipment we have is the Ruckus box itself.

Please let me know if there is any additional information you may need.

Chelsea

Re: Ruckus in Lennar Home - Power Disconnects

Imran_ruckus — Mon, 23 Oct 2023 15:28:19 GMT

Hi @Chelskylar

Greetings!!!

I hope you are doing well!!!

Thank you for the detailed information you shared.

As per the pictures you shared, the light status of the RUCKUS ICX-7150-C12P Switch and the connections seems normal.

This issue may happen when the Switch runs on the Routing code (SPR). The Switch should run on the Switching code (SPS) to avoid these issues for Lennar home users. If the Switch boots up on the other partition (Due to a power outage/power spike) which may be running on a ‘Routing Code’ results in causing this issue. To check the same please follow the below process.

Please follow the below steps and help us with the queries:

1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

2. Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access the Command line should look like this:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command

enable

show version

show flash

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Ruckus in Lennar Home - Power Disconnects

Chelskylar — Sun, 19 Nov 2023 00:45:03 GMT

This process has not been successful for me. Is there a way for someone to remotely access my computer to assist? I downloaded both the IP address finder and PuTTy but I am still having no luck.

Re: Ruckus in Lennar Home - Power Disconnects

Imran_ruckus — Mon, 20 Nov 2023 16:04:25 GMT

Hi @Chelskylar

Greetings!!!

Thank you for the response and the information you shared.

Are you able to see the IP Address of the RUCKUS ICX-7150-C12P Switch from the IP Scanner application?

You should see the Switch Dashboard as shown in the below screenshot to confirm it’s a Switch IP Address.

Please check the other IP Addresses from the IP scan results, by the name of Ruckus Wireless or Brocade Communications to confirm the IP address of the Switch and access the CLI.

Please check and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Ruckus in Lennar Home - Power Disconnects

Chelskylar — Sat, 02 Dec 2023 15:54:41 GMT

Hello Imran,

Please see the screenshots below.

Re: Ruckus in Lennar Home - Power Disconnects

Imran_ruckus — Mon, 04 Dec 2023 15:23:07 GMT

Hi @Chelskylar

Greetings!!!

Thank you for the response and the information you shared.

Could you please confirm if you are using the correct Switch IP Address? Are you able to see the Switch dashboard on a web browser as described in my previous post?

Please confirm and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.