How to update ICX7150 to latest stable release from SPS08090k

Raj — Sat, 12 Aug 2023 11:47:46 GMT

Hi,

I have ICX 7150 switch from Lennar. I recently had to re-install my software to bring switch from boot loop. It is currently running version SPS08090k and the current recommended version is 08095j. This version supports only UFI format. How to do I get to 08095j from 8090k? Do I need to go intermediate version 8085f? 8085f seems to be going backwards from the current version of 8090k.

Re: How to update ICX7150 to latest stable release from SPS08090k

Imran_ruckus — Mon, 14 Aug 2023 16:07:54 GMT

Hi @Raj

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that you need assistance in Upgrading your RUKCUS ICX-7150-C12P Switch to a stable version from the 08090k version.

Please note, that you are on a UFI 08090k version which doesn’t require an intermediate UFI image such as 08080f. You can directly Upgrade to any UFI image directly from the 08090k version. And we recommend upgrading RUCKUS ICX-7150-C12P Switch to the 08095 version for Lennar home users as it is stable for the same.

Please follow the below steps explaining the Upgrade process.

The recommended stable version is 08095g (08.0.95g)

The Upgrade path would be: 08090k (your current version)>> 08095g

(PLEASE NOTE: Use 08095g patch in place of 8095h as explained in the guide and Ignore 08080f as mentioned it is not required)

Below are the options or methods to perform the Upgrade on the switch: You could choose any one of these.

1st Option:

1. In this option, we will use a pen drive or USB flash drive in which we move the files to the pen drive and connect it to the Switch then through CLI we execute the commands to upgrade the Switch using the following guide as a reference:

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2nd Option:

2. The following guide is an example of an upgrade via TFTP server, by using an application (FREE) to send files or upload remote files to a device, in our case, we will use it to update a new version to the Switch, basically it will send the image version remotely from the computer to the switch.

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/td-p/47187

3rd Option:

3. In this option we Upgrade the Switch from the Web Interface (GUI) of switch.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Try to access your switch from a web browser by pasting the below URL in http or https form whichever that works.

https://0.0.0.0 or http://0.0.0.0 (IP address of Switch. 0.0.0.0 is just as an example)

If you can can access CLI, I would suggest you follow the 2nd option.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

topic Re: How to update ICX7150 to latest stable release from SPS08090k in RUCKUS Support for Lennar Homes

How to update ICX7150 to latest stable release from SPS08090k

Re: How to update ICX7150 to latest stable release from SPS08090k