Switches sowing disconected so how I fix that?

jasminkoplje — Tue, 01 Aug 2023 23:45:10 GMT

I am Unleashed Lennar Home client and I have problem with some of the apps and some of the pages loading process and after I check my Unleashes site, I realize that I have Switch disconnected. is that have anything to do with my problem? When connecting to Ruckcus access points I am often timed out trying to navigate to some sites... All access points are online. Not sure if they works as expected because I am having all the issues accessing internet. I did reboot both switch and access points several time already.

Re: Switches sowing disconected so how I fix that?

Imran_ruckus — Tue, 01 Aug 2023 23:51:38 GMT

Hi @jasminkoplje

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

As per the case description, I could understand that your RUCKUS setup is not working, with intermittent Internet connectivity.

This issue may happen when the Switch runs on the Routing code (SPR). The Switch should run on the Switching code (SPS) to avoid these issues for Lennar home users. If the Switch boots up on the other partition (Due to a power outage/power spike) which may be running on a ‘Routing Code’ results in causing this issue. To check the same and troubleshoot please follow the below process.

Please follow the below steps and help us with the queries,

1. To check this issue, we must identify the ‘current’ IP address assigned by your local router to the switch ICX-7150-C12P

I will leave you a guide on how to perform an IP scanner on your local network to identify the switch IP address very easily.

How to find my Ruckus “Devices IP address” using free applications:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-find-my-Ruckus-Devices-IP-address-using-free-applications/td-p/47027

2. Once we identify the IP address of the switch proceed to access remotely to the device “Command Line”

How to remotely access to 'ICX 7150-C12P' or 'access points' "Network devices":

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-remotely-access-to-ICX-7150-12P-or-access-points-quot/td-p/47388

If you can access the Command line should look like this:

ICX7150-C12 Router> OR

ICX7150-C12 Switch>

Please enter the below commands once you log in to CLI and share the output.

Note: Hit Enter to accept each command

enable

show version

show flash

Please share the output of the above commands or share the screenshots if stuck at any step or error (if any) and let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

topic Re: Switches sowing disconected so how I fix that? in RUCKUS Support for Lennar Homes

Switches sowing disconected so how I fix that?

Re: Switches sowing disconected so how I fix that?