topic Re: Ruckus system randomly cycling in RUCKUS Support for Lennar Homes

Ruckus system randomly cycling

ajc — Wed, 26 Jul 2023 02:56:40 GMT

My home has ICX7150-C12-Switch and 2 r510 ap. The Ruckus system seems to reset randomly. The ATT fiber router/modem is not as internet is available through ATT. The switch does not show up in the Unleashed app but the access points do. I connected my laptop directly to the switch but cannot get pass the login (192.168.1.100) using any of the passwords I originally got from the tech ( super &sp-admin, admin & ruckus). Called Ruckus and they say i must post to forum. Any assistance would be appreciated. Home built in 2019.

Re: Ruckus system randomly cycling

Jayavidhya — Wed, 26 Jul 2023 13:09:46 GMT

Hi @ajc

Greetings of the day,

If the default credentials doesn't work please try the most common username and passwords ( This is key sensitive so please include capital letters )

Username:admin password: Ruckus!

Username:admin password: Ruckus1

Username:admin password: Lennar

Username:super password: sp-admin

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-passwords-for-the-Ruckus-Wi-Fi-Access-Points/m-p/46740

Also for detailed understanding of the issue please let us know the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Wed, 26 Jul 2023 22:53:34 GMT

Tried the various password combinations and none work when I log in from the ruckus web page at 192.168.1.100. I tried to login via wifi and via ethernet. I am able to login from the app but cannot see the switch in the app. The app login credentials does not work on the webpage.

One r510 has all LED green except AIR is unlit.

Second r510 has all LED Lit except CTL and AIR are unlit.

Re: Ruckus system randomly cycling

Jayavidhya — Thu, 27 Jul 2023 12:44:51 GMT

Hi @ajc

If the credentials doesn't work we need to perform the password recovery process.

We need physical access to the ICX-7150-Using the console connection

Here is a short guide :

How to console in the ICX-7150-C12P

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-7150-12CP-Ruckus-Switch/m-p/46759

Short Guide for password recovery :

https://support.purdi.com/hc/en-gb/articles/360016495292-Ruckus-ICX-Password-Recovery-Resetting-a-Switch

Video link as reference : https://www.youtube.com/watch?v=XJS28DWbHM4

1.Start a CLI session over the serial ( console access) interface to the RUCKUS ICX device.

2-Enter OS mode. This uses a key combination and drops below the fastiron operating system

Key Combination: Ctrl+y, release, tap 'm', tap 'Enter'

OS>

4-just write reset

OS>reset

5-.While the system is booting, before the initial system prompt appears,
enter b to enter the boot monitor mode.

Enter 'b' to stop at boot monitor: 0

In this Part you have to press B before the counter ends

6-Enter no password. (You cannot abbreviate this command.)

ICX7650-Boot> no password
00 00 00 00
OK! Skip password check when the system is up.

7-Enter boot. This command causes the device to bypass the system password
check.

ICX7650-Boot> boot

8-After the console prompt reappears, assign a new password.

device> enabledevice# configure terminal
device(config)# username USERNAME password PASSWORD

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Fri, 28 Jul 2023 17:01:35 GMT

Thanks for the help so far. The power cycling seems to have been fixed. I was able to access the switch via telnet using putty and I verified that the switch is now running switch code. I have ahave a few problems:

The switch still is not showing in the app or on the webpage at unleashed.ruckuswireless.com. This webpage and the app uses the same login/passwords. I cannot access the switch using 192.168.1.100 since all the login/password combinations I tried hasn't worked.
I am not able to access the switch with putty via SSH or serial to attempt password recovery. SSH says access refused. serial doesn't show a com port. i have installed the drivers multiple times. telnet does not allow the commands indicated for password recovery.
Now one of my access points is restricting speed, The app shows name "port1", physical link "up to 100mbps full", logical link "up", lable "10/100/1000 poe port1. Sometimes it will show physical link "up to 1000mbps full". The other ap aways show the physical link "up 1000mbps full". Some it seems that when a high speed device is connected to the 100mbps access point the speed is restricted below 100mbps.

Re: Ruckus system randomly cycling

Jayavidhya — Fri, 28 Jul 2023 17:26:29 GMT

Hi @ajc

Thanks for your response.

For detailed understanding of the issue please try to access the switch via telnet and share the output of the following commands.

enable

show version

show flash

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Fri, 28 Jul 2023 18:08:25 GMT

telnet@ICX7150-C12 Switch>enable

No password has been assigned yet...

telnet@ICX7150-C12 Switch#show version

UNIT 1: compiled on Nov 20 2018 at 00:09:55 labeled as SPS08080d

(25968884 bytes) from Primary SPS08080d.bin

SW: Version 08.0.80dT211

Compressed Boot-Monitor Image size = 786944, Version:10.1.14T225 (mnz10114)

Compiled on Thu Nov 15 12:59:22 2018

HW: Stackable ICX7150-C12-POE

==========================================================================

UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module

Serial #:FEK3817Q1TY

Software Package: BASE_SOFT_PACKAGE

Current License: 2X1G

P-ASIC 0: type B160, rev 11 Chip BCM56160_B0

==========================================================================

UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module

==========================================================================

UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module

==========================================================================

1000 MHz ARM processor ARMv7 88 MHz bus

8192 KB boot flash memory

2048 MB code flash memory

1024 MB DRAM

STACKID 1 system uptime is 18 hour(s) 40 minute(s) 18 second(s)

The system started at 00:03:37 GMT+00 Sat Jan 01 2000

The system : started=cold start

telnet@ICX7150-C12 Switch#

telnet@ICX7150-C12 Switch>show flash

Stack unit 1:

NAND Type: Micron NAND 2GiB (x 1)

Compressed Pri Code size = 25968884, Version:08.0.80dT211 (SPS08080d.bin)

Compressed Sec Code size = 29819448, Version:08.0.80dT213 (SPR08080d.bin)

Compressed Boot-Monitor Image size = 786944, Version:10.1.14T225

Code Flash Free Space = 1306206208

Re: Ruckus system randomly cycling

Jayavidhya — Fri, 28 Jul 2023 18:47:40 GMT

Hi @ajc

To add the switch in the unleashed dashboard the switch has to be upgraded to 08095g code. So please try to upgrade the switch from 08095 code using the below guide.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/m-p/47187

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Sat, 29 Jul 2023 05:15:48 GMT

i upgraded the switch to 08095 code using the tftp option. the switch still does not show on the webpage or app. when i tried to add it via the webpage it asks for the login and password which i don't have. i used my the app password and got the error screen below. Seems I need to recover that switch password to move forward.

Unleashed system only supports ICX firmware version 08.0.90 or later.

ICX Switch is Connecting

MAC Address:

00:00:00:00:00:00

IP Address:

192.168.1.100

SSH service is not enabled on ICX 192.168.1.100. Please manually enable it on ICX.

Re: Ruckus system randomly cycling

Jayavidhya — Mon, 31 Jul 2023 12:31:21 GMT

Hi @ajc

Thanks for your response.

Please let us know the LED status of the switch using the below guide. Also please share the image of the switch showing the LED status and the cable connections.

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

Here is where you can upload the image/photo :

you can also drag it to the chat.

To perform password recovery please use the MobaXterm app (similar to putty) and follow the password recovery steps.

For MacOS system like like MacBook we can access from the terminal of the device without having to install a tool.

For Telnet access:

nc ‘IP of the device’ 23

For ssh Access:

ssh ‘username’@’IP of the device’

Note: if access to ssh does not work tried the following ssh-keygen -R 'ip address of the device' this generates a public key pair for use when authenticating with a remote server.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Mon, 31 Jul 2023 17:32:10 GMT

Figure 1. Port-side LEDs of ICX 7150-C12P

Port status mode selection button green
Port link status mode LED
Port speed status mode LED
Member ID status mode LED
USB status mode LED
PoE status mode LED
System Status LED green
Master/Slave status LED
Software update status LED
RJ-45 port 5 RX/TX activity LED (if blinking indicates RX/TX activity) green on ap cables
PoE LED
RJ-45 uplink port C1 status LED
RJ-45 uplink port C1 RX/TX activity LED
SFP+ uplink port X1 status LED (if blinking indicates RX/TX activity)
SFP+ uplink port X2 status LED (if blinking indicates RX/TX activity)
Power status LED green
Cloud/On-premise-SmartZone management status LED
Diagnostics status LED

cables with white paint are aps, dark blue cable is att gateway, other eth cables are devices (camera, doorlock, etc)master apatt gateway

Re: Ruckus system randomly cycling

Jayavidhya — Mon, 31 Jul 2023 18:06:07 GMT

Hi @ajc

Please let us know whether you have tried the password recovery process in MobaXterm app. If not please try the password recovery process and let us know the result.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Mon, 31 Jul 2023 18:10:58 GMT

I have not tried the password recovery in MobaXterm as yet. I will try that this afternoon.

Re: Ruckus system randomly cycling

Jayavidhya — Mon, 31 Jul 2023 18:49:09 GMT

Hi @ajc

Thanks for your update.

Please let us know the result once you are done with the above process.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Tue, 01 Aug 2023 00:07:44 GMT

So i logged in using the Mobaxterm. This is what I got. I connected again for over 40 minute and it will not come out of this mode.

Re: Ruckus system randomly cycling

Jayavidhya — Tue, 01 Aug 2023 12:45:54 GMT

Hi @ajc

For detailed understanding of the issue please share the output of the following commands by gaining access to the switch using the below guide.

show lldp neighbors

show poe

show version

show flash

show log

Also please share the screenshot of the status of the switch and the access points as mentioned below.

Admin & Services > Administer > Upgrade

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Tue, 01 Aug 2023 14:10:28 GMT

telnet@ICX7150-C12 Switch>show lldp neighbors

LLDP is not running

telnet@ICX7150-C12 Switch>show poe

Power Capacity: Total is 124000 mWatts. Current Free is 93200 mWatts.

Power Allocations: Requests Honored 17 times

Port Admin Oper ---Power(mWatts)--- PD Type PD Class Pri Fault/

State State Consumed Allocated Error

-----------------------------------------------------------------------------

1/1/1 On On 3200 15400 2P-IEEE Class 3 3 n/a

1/1/2 On Off 0 0 n/a n/a 3 n/a

1/1/3 On On 3000 15400 2P-IEEE Class 3 3 n/a

1/1/4 On Off 0 0 n/a n/a 3 n/a

1/1/5 On Off 0 0 n/a n/a 3 n/a

1/1/6 On Off 0 0 n/a n/a 3 n/a

1/1/7 On Off 0 0 n/a n/a 3 n/a

1/1/8 On Non-PD 0 0 n/a n/a 3 n/a

1/1/9 On Non-PD 0 0 n/a n/a 3 n/a

1/1/10 On Non-PD 0 0 n/a n/a 3 n/a

1/1/11 On Non-PD 0 0 n/a n/a 3 n/a

1/1/12 On Non-PD 0 0 n/a n/a 3 n/a

-----------------------------------------------------------------------------

Total 6200 30800

telnet@ICX7150-C12 Switch>show version

UNIT 1: compiled on Jun 9 2023 at 06:14:36 labeled as SPS08095k

(31457280 bytes) from Primary SPS08095k.bin (UFI)

SW: Version 08.0.95kT211

Compressed Secondary Boot Code size = 786944, Version:10.1.26T225 (mnz10126)

Compiled on Tue Nov 29 12:43:26 2022

HW: Stackable ICX7150-C12-POE

==========================================================================

UNIT 1: SL 1: ICX7150-C12-2X1G POE 12-port Management Module

Serial #:FEK3817Q1TY

Software Package: BASE_SOFT_PACKAGE

Current License: 2X1G

P-ASIC 0: type B160, rev 11 Chip BCM56160_B0

==========================================================================

UNIT 1: SL 2: ICX7150-2X1GC 2-port 2G Module

==========================================================================

UNIT 1: SL 3: ICX7150-2X10GF 2-port 20G Module

==========================================================================

1000 MHz ARM processor ARMv7 88 MHz bus

8 MB boot flash memory

2 GB code flash memory

1 GB DRAM

STACKID 1 system uptime is 3 day(s) 9 hour(s) 9 minute(s) 13 second(s)

The system started at 06:14:38 GMT+00 Fri Jun 09 2023

The system : started=cold start

telnet@ICX7150-C12 Switch>show flash

Stack unit 1:

NAND Type: Micron NAND 2GiB (x 1)

Compressed Pri Code size = 31457280, Version:08.0.95kT211 (SPS08095k.bin)

Compressed Sec Code size = 31457280, Version:08.0.95kT211 (SPS08095k.bin)

Compressed Pri Boot Code size = 786944, Version:10.1.14T225 (mnz10114)

Compressed Sec Boot Code size = 786944, Version:10.1.26T225 (mnz10126)

Code Flash Free Space = 1099386880

telnet@ICX7150-C12 Switch>

Re: Ruckus system randomly cycling

ajc — Tue, 01 Aug 2023 14:16:16 GMT

The log exceed 20000 characters so i am attaching first part. Note I have one of the access points unplugged, but plugged it back in about 15 minutes before generating the log.

telnet@ICX7150-C12 Switch>show log

Syslog logging: enabled ( 0 messages dropped, 0 flushes, 1 overruns)

Buffer logging: level ACDMEINW, 4000 messages logged

level code: A=alert C=critical D=debugging M=emergency E=error

I=informational N=notification W=warning

Static Log Buffer:

Jun 9 06:14:51:I:System: Stack unit 1 POE PS 1, Internal Power supply with 124000 mwatts capacity is up

Dynamic Log Buffer (4000 lines):

Jun 12 15:10:54:I:Security: telnet login by un-authenticated telnet user from src IP 192.168.1.119 from src MAC ac74.b1bc.a264 to USER EXEC mode

Jun 12 15:05:31:I:STP: VLAN 1 Port 1/1/3 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 15:05:29:I:STP: VLAN 1 Port 1/1/3 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 15:05:27:I:STP: VLAN 1 Port 1/1/3 STP State -> LISTENING (MakeFwding)

Jun 12 15:05:27:I:System: Interface ethernet 1/1/3, state up

Jun 12 15:05:08:I:System: Interface ethernet 1/1/3, state down

Jun 12 15:05:08:I:STP: VLAN 1 Port 1/1/3 STP State -> DISABLED (PortDown)

Jun 12 15:05:08:I:STP: VLAN 1 Port 1/1/3 STP State -> FORWARDING (PortDown)

Jun 12 15:04:51:I:STP: VLAN 1 Port 1/1/3 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 15:04:49:I:STP: VLAN 1 Port 1/1/3 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 15:04:46:I:STP: VLAN 1 Port 1/1/3 STP State -> LISTENING (MakeFwding)

Jun 12 15:04:46:I:System: Interface ethernet 1/1/3, state up

Jun 12 15:04:24:I:System: PoE: Power enabled on port 1/1/3.

Jun 12 01:04:55:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:04:53:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:04:50:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:04:50:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:04:47:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:04:47:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:04:47:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (PortDown)

Jun 12 01:04:47:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:04:47:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:04:44:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:04:44:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:04:44:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 01:04:18:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:04:16:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:04:13:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:04:13:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:04:10:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:04:10:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:04:10:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 01:03:20:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:03:18:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:03:15:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:03:15:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:03:12:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:03:12:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:03:12:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 01:02:48:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:02:46:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:02:43:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:02:43:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:02:40:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:02:40:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:02:40:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 01:01:51:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:01:49:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:01:46:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:01:46:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:01:43:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:01:43:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:01:43:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 01:01:18:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:01:16:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:01:13:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:01:13:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:01:10:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:01:10:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:01:10:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 01:00:19:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 01:00:17:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 01:00:14:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 01:00:14:I:System: Interface ethernet 1/1/12, state up

Jun 12 01:00:11:I:System: Interface ethernet 1/1/12, state down

Jun 12 01:00:11:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 01:00:11:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:59:48:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:59:46:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:59:43:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:59:43:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:59:40:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:59:40:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:59:40:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:58:49:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:58:47:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:58:44:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:58:44:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:58:41:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:58:41:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:58:41:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:58:17:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:58:15:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:58:13:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:58:13:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:58:10:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:58:10:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:58:10:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:57:18:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:57:16:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:57:13:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:57:13:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:57:11:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:57:11:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:57:11:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:56:47:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:56:45:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:56:42:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:56:42:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:56:40:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:56:40:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:56:40:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:55:50:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:55:48:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:55:45:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:55:45:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:55:43:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:55:43:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:55:43:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:55:17:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:55:15:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:55:12:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:55:12:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:55:09:I:System: Interface ethernet 1/1/12, state down

Jun 12 00:55:09:I:STP: VLAN 1 Port 1/1/12 STP State -> DISABLED (PortDown)

Jun 12 00:55:09:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (PortDown)

Jun 12 00:54:18:I:STP: VLAN 1 Port 1/1/12 STP State -> FORWARDING (FwdDlyExpiry)

Jun 12 00:54:16:I:STP: VLAN 1 Port 1/1/12 STP State -> LEARNING (FwdDlyExpiry)

Jun 12 00:54:13:I:STP: VLAN 1 Port 1/1/12 STP State -> LISTENING (MakeFwding)

Jun 12 00:54:13:I:System: Interface ethernet 1/1/12, state up

Jun 12 00:54:10:I:System: Interface ethernet 1/1/12, state down

Re: Ruckus system randomly cycling

Jayavidhya — Tue, 01 Aug 2023 15:20:33 GMT

Hi @ajc

Based on the description it seems like SSH and LLDP were not enabled, so please try to upgrade it using the below commands.

Switch(config)#configure terminal

Switch(config)#crypto key generate

Switch(config)#aaa authentication login default local

Switch(config)#lldp run

Switch(config)#write memory

Note: give 10 minutes after changes, if it does not join, hit add from the Unleashed dashboard.

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Ruckus system randomly cycling

ajc — Tue, 01 Aug 2023 18:54:13 GMT

Unable to login with all the suggested passwords. I tried to reset passwords using the suggested links but cannot get the terminal to accept input in boot. Tried both Mobaxterm and Putty. attaching screen shot below.

Ruckus Networks Bootloader: 10.1.26T225 (Nov 29 2022 - 04:43:18 -0800)

Booted from partition 2

DRAM: Validate Shmoo parameters stored in flash ..... OK

ICX7150-12 (POE), PVT1

SYS CPLD VER: 0x4 Released Ver: 0xa

Crashkernel Disabled

device 0 offset 0xbfe00, size 0x200

Enter 'b' to stop at boot monitor: 0

device 0 offset 0x0, size 0xc0000

Uboot Checksum Verification: PASS

bootdelay: ===

Booting image from Primary

NAND read: device 0 offset 0x0, size 0x2000000

33554432 bytes read: OK

Image Checksum Verification: PASS

## Loading kernel from FIT Image at 70000200 ...

Using 'conf@1' configuration

Trying 'kernel@2' kernel subimage

Description: Ruckus Linux MN VER=08.0.95k

Type: Kernel Image

Compression: lzma compressed

Data Start: 0x7024fac8

Data Size: 2400635 Bytes = 2.3 MiB

Architecture: ARM

OS: Linux

Load Address: 0x61008000

Entry Point: 0x61008000

Hash algo: crc32

Hash value: e0295445

## Loading kernel from FIT Image at 70000200 ...

Using 'conf@1' configuration

Trying 'kernel@2' kernel subimage

Description: Ruckus Linux MN VER=08.0.95k

Type: Kernel Image

Compression: lzma compressed

Data Start: 0x7024fac8

Data Size: 2400635 Bytes = 2.3 MiB

Architecture: ARM

OS: Linux

Load Address: 0x61008000

Entry Point: 0x61008000

Hash algo: crc32

Hash value: e0295445

Verifying Hash Integrity ... crc32+ OK

## Loading ramdisk from FIT Image at 70000200 ...

Using 'conf@1' configuration

Trying 'ramdisk@1' ramdisk subimage

Description: Ramdisk -rootfs

Type: RAMDisk Image

Compression: lzma compressed

Data Start: 0x704a0638

Data Size: 24878012 Bytes = 23.7 MiB

Architecture: ARM

OS: Linux

Load Address: 0x00000000

Entry Point: 0x00000000

Hash algo: crc32

Hash value: 907251b3

Verifying Hash Integrity ... crc32+ OK

## Loading fdt from FIT Image at 70000200 ...

Using 'conf@1' configuration

Trying 'fdt@3' fdt subimage

Description: Flattened Device Tree blob

Type: Flat Device Tree

Compression: uncompressed

Data Start: 0x7049e3a0

Data Size: 8671 Bytes = 8.5 KiB

Architecture: ARM

Hash algo: crc32

Hash value: 85a08cb4

Verifying Hash Integrity ... crc32+ OK

Loading fdt from 0x7049e3a0 to 0x65008000

Booting using the fdt blob at 0x65008000

Uncompressing Kernel Image ... OK

Using Device Tree in place at 65008000, end 6500d1de

Starting kernel ...

Mounting file system...

booting with 4.4 kernel

NAND Type: Micron NAND 2GiB (x 1)

Mounting file system.PLATFORM MN

booting with 4.4 kernel

NAND Type: Micron NAND 2GiB (x 1)

dd cmd: UBI

Mounting file system.PLATFORM MN

booting with 4.4 kernel

NAND Type: Micron NAND 2GiB (x 1)

dd cmd: UBI

Mounting file system.PLATFORM MN

booting with 4.4 kernel

NAND Type: Micron NAND 2GiB (x 1)

dd cmd: UBI

Mounting file system.PLATFORM MN