Issues after power outage

sgreen8 — Tue, 25 Jul 2023 14:18:27 GMT

After a planned power outage Ruckus is working and I can get into wifi network, but webpages do not download. Provider wifi working fine. What could be the issue?

Re: Issues after power outage

Jayavidhya — Tue, 25 Jul 2023 14:35:49 GMT

Hi @sgreen8

Greetings of the day,

For detailed understanding of the issue, please let us know the LED status of the switch and the access points using the below guide.

R510 LED lights

https://docs.commscope.com/bundle/unleashed-200.12-onlinehelp/page/GUID-19D4261B-D10B-4DE3-B63A-3498F80103D0.html

RUCKUS LED lights

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

Re: Issues after power outage

sgreen8 — Tue, 25 Jul 2023 16:34:32 GMT

5g green, 2.4g green, Air not lit, CTL green, PWR green. Round status button not lit, stat green, spd faint green; id, usb and Poe not lit.Syst green, PWR green; diag, cld, ms, update are all faint green

Re: Issues after power outage

Jayavidhya — Tue, 25 Jul 2023 17:07:47 GMT

Hi @sgreen8

Thanks for your response.

Based on your description, it seems that your switch may be booting from the secondary partition ( Note: Secondary partition contains the routing code) which is causing bad connectivity issues. This could happen after multiple power outages, please follow up the next guide.

Note: if you have access to the Unleashed Dashboard and the Switch can be seen from there, it may look like the following image, ICX7150-C12-Router instead of ICX7150-C12-Switch, now before starting the steps of the guide, I will advise you to cable the computer directly to the Switch, since you will have a better connectivity than if you connect via wireless.

How to Fix Routing code issues on Lennar Home users via CLI

Guide#1 for CLI:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issues-on-Lennar-Home-users/td-p/47305

Guide#2 for CLI:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-solve-the-routing-code-issue-in-your-ICX7150-Switch/td-p/47335

How to Fix Routing code issues on Lennar Home users via Web GUI.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issues-on-Lennar-Home-users-via-Web-GUI/td-p/47959

After fixing the issue of the Switch booting from the wrong partition, please perform an upgrade to the code 08095g UFI and upgrade both partitions primary and secondary with the switching code file named SPS08095gufi.bin, take into consideration that is the Switch is running a code lower than 08080 you need to upgrade twice, from the code you are to 08080f and then the recommended code 08095g UFI.

1.Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-using-a-USB-flash-drive/td-p/46781

2. Upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-7150-C12P-via-TFTP/m-p/47187

3. Upgrade a switch via Web GUI (ICX7150 Switch)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-via-Web-GUI-ICX7150-Switch/td-p/48200

Please let us know if you have any queries in this regard.

Best regards,

Jayavidhya

Lennar Home Community

topic Re: Issues after power outage in RUCKUS Support for Lennar Homes

Issues after power outage

Re: Issues after power outage

Re: Issues after power outage

Re: Issues after power outage