topic Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home in RUCKUS Support for Lennar Homes

Cannot log in to Switch to Fix Routin code issues on Lennar Home

HelpMePlease — Fri, 07 Jul 2023 00:34:01 GMT

I recently had a power outage and now my Switch is in Router mode. I followed the instructions at the below site and I was able to get the IP Address of my Switch (Router) but none of the login combinations work. Any idea of an alternative?

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Fix-Routing-code-issues-on-Lennar-Home-users-via-Web-GUI/m-p/47959

Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home

Rock1 — Fri, 07 Jul 2023 02:55:26 GMT

Refer to my post (ID= Rock1) from today (06-Jul-2023). If you know the IP address of the device and use telnet, then you might have similar success in getting the device to revert to Switch mode.

Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home

Jayavidhya — Fri, 07 Jul 2023 13:05:32 GMT

Hi @HelpMePlease

Greetings of the day,

Please try the most common username and passwords ( This is key sensitive so please include capital letters )

Username:admin password: Ruckus!

Username:admin password: Ruckus1

Username:admin password: Lennar

Username:super password: sp-admin

Admin usernames and passwords for the Ruckus Wi-Fi Access Points/Switch for Lennar home users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Admin-usernames-and-passwords-for-the-Ruckus-Wi-Fi-Access-Points/m-p/46740

Best regards,

Jayavidhya

Lennar Home Community

Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home

mrq201 — Mon, 24 Jul 2023 13:19:38 GMT

I tried this too and mine was not fixed. I then went to the Command Line to try that other step; however, I have a MAC and when I tried the SSH solution, it asks for a password. Thing is, NONE of the passwords that were suggested work.

Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home

mrq201 — Mon, 24 Jul 2023 13:21:20 GMT

None of those passwords work. I am trying to SSH (using a mac) into the switch. I get prompted with the message password. I tried EVERY password you all suggested and it doesn't work. How I am able to resolve this issue that it seems like alot of people are having??

Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home

mrq201 — Mon, 24 Jul 2023 13:22:12 GMT

I think with Telnet, it doenst ask for a password. I only have a mac so im forced to use SSH; however, it asks for a password so now im stuck.

Re: Cannot log in to Switch to Fix Routin code issues on Lennar Home

Imran_ruckus — Mon, 24 Jul 2023 15:41:53 GMT

Hi @mrq201

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Apologies for the inconvenience, as this case is raised by @HelpMePlease which now closed, I will be assisting you with your own post/case you have raised. (Please refer to the link below)

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Routing-Code-Issues/m-p/64281#M10790

Thank you again for understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.