topic Re: Upgrade ICX7150-C12 to latest firmware in RUCKUS Support for Lennar Homes

Upgrade ICX7150-C12 to latest firmware

yeahdawg — Thu, 20 Jul 2023 15:01:28 GMT

What does the upgrade process look like for upgrading ICX7150-C12?

Here is the current version I am on SPS08080d

Re: Upgrade ICX7150-C12 to latest firmware

Imran_ruckus — Thu, 20 Jul 2023 16:17:02 GMT

Hi @yeahdawg

Greetings!!!

Thank you for contacting RUCKUS Lennar Home Community.

Hope you are doing well!!!

Thank you for the information you shared.

From the case description, I could understand that you need assistance in Upgrading your ICX-7150-C12P Switch and your current version in 08080d.

Please follow to the below steps explaining the Upgrade process.

The recommended stable versions is 8095g (08.0.95g)

The Upgrade path would be: 08080d (your current version)>>8080f>>8095g

(PLEASE NOTE: Use 08095g patch in place of 8095h as explained in the guide)

Your Upgrade folder should contain these 3 files shown in the below screenshot: (Refer the guide link for more information)

Below are the options or methods to perform the Upgrade on the switch: You could choose any one of these.

1st Option:

1. In this option, we will use a pen drive or USB flash drive in which we move the files to the pen drive and connect it to the Switch then through CLI we execute the commands to upgrade the Switch using the following guide as a reference:

How to Upgrade a Switch ICX-7150-C12P using a USB flash drive

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

2nd Option:

2. The following guide is an example of an upgrade via TFTP server, by using an application (FREE) to send files or upload remote files to a device, in our case, we will use it to update a new version to the Switch, basically it will send the image version remotely from the computer to the switch.

How to upgrade a Switch ICX7150-C12P via TFTP

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-Upgrade-a-Switch-ICX-...

3rd Option:

3. In this option we Upgrade the Switch from the Web Interface (GUI) of switch.

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-an-Upgrade-vi...

Try to access your switch from a web browser by pasting the below URL in http or https form whichever that works.

https://0.0.0.0 or http://0.0.0.0 (IP address of Switch. 0.0.0.0 is just as an example)

As you can access CLI, I would suggest you follow the 2nd option.

Please let me know if you have any queries in this regard.

Thank you again for your patience.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.

Re: Upgrade ICX7150-C12 to latest firmware

yeahdawg — Thu, 20 Jul 2023 20:55:51 GMT

Thank you Imran, I have successfuly upgraded to sps08095g.

How and when do we know if there is a next stable version to update the ruckus system? Do we get notified or do we just have to check every few months?

Re: Upgrade ICX7150-C12 to latest firmware

Imran_ruckus — Thu, 20 Jul 2023 21:07:37 GMT

Hi @yeahdawg

Greetings!!!

Thank you for the response and the Update.

We have got other versions released, however, for Lennar Homer Users we always recommend upgrading the Switch to the SPS08095g Version which is the most stable for now.

Version patch release could be checked on https://support.ruckuswireless.com/software link. Or always we recommend you check with us on this ‘RUCKUS Lennar Support’ community forum before upgrading and to know more about stability-related information of any released patch for the RUCKUS ICX-7150-C12P Switch.

Please let me know if you have any queries in this regard.

Thank you again for your patience and understanding.

Best regards,

Imran Sanadi

RUCKUS Lennar Home Community.