Ruckus will not load based on instructions

what_ruckus83 — Sun, 16 Jul 2023 04:20:23 GMT

I have attempted to reset my ruckus 4 times now following the directions from this page:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/m-p/47483

When I run the putty commands, the host will not show as live

I have completed these steps multiple times by

1. Changing the console cables to ensure the cables are active

2. Changed computers

3. Used multiple ethernet cables to ensure the wire is working, testing the wire as an ethernet connection to my modem and the internet is connecting.

I believe the switch is malfunctioning and requires a RMA.

Re: Ruckus will not load based on instructions

Jayavidhya — Mon, 17 Jul 2023 13:10:14 GMT

Hi @what_ruckus83

Greetings of the day,

Thanks for the detailed description.

Please try the same troubleshooting steps by turning off the windows firewall. Here I share the guide on how to turn off windows firewall.

Guide to turn off Windows firewall

https://support.microsoft.com/en-us/windows/turn-microsoft-defender-firewall-on-or-off-ec0844f7-aebd...

Please read the guide carefully before starting the steps.

How to perform a Software recovery on an ICX7150 switch

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-re...

Ruckus ICX Recovery tutorial video

https://www.youtube.com/watch?v=RHriOYYD_iI&t=7s

Best regards,

Jayavidhya

Lennar Home Community

topic Re: Ruckus will not load based on instructions in RUCKUS Support for Lennar Homes

Ruckus will not load based on instructions

Re: Ruckus will not load based on instructions