topic Re: IoT Controller's Node-red port in IoT Networking

IoT Controller's Node-red port

nets — Wed, 27 Jul 2022 17:19:44 GMT

Does someone know what is the IoT Controller's Node-red port?

Re: IoT Controller's Node-red port

Vineet_nejwala — Fri, 29 Jul 2022 15:48:52 GMT

I guess you mean communication on port ? That should be 8883 (secure) or 1883. Do correct me you had something else please.

Best Regards

Vineet

Re: IoT Controller's Node-red port

nets — Fri, 29 Jul 2022 17:06:20 GMT

I try to push data from BLEScan plugin into the IoT Controller's inbuilt Node-red. I have set up the 'http in' node in Node-red. I tried to push data to ports you recommended, but Node-red is not listening on these ports of the IoT controller. My question is how should I direct data from the internal plugin into the internal Node-red?

Re: IoT Controller's Node-red port

Vineet_nejwala — Tue, 02 Aug 2022 10:04:09 GMT

Hi @nets

Okay, so you want to configure BLE scan plugin data to be forwarded internally to node-red. You would have to configure BLE scan plugin to forward the data to 1880 and configure the URL as https://xx.xx.xx.xx (controller IP) and whatever endpoint "/sample/endpoint" (should be same as what is given in the node-red http in] then it will forward correctly. Please let me know in case any issue persist.

Best Regards

Vineet

Re: IoT Controller's Node-red port

nets — Tue, 02 Aug 2022 08:09:04 GMT

Hi Vineet, Thanks. It didn't work on https://10.157.96.144 but worked on the localhost https://127.0.0.1 port 1880. I figured it out when I restarted the rules engine in IoT controller Admin tab and checked the logs. The logs showed:

1 Aug 18:41:04 - [info] Starting flows

1 Aug 18:41:05 - [info] Started flows

1 Aug 18:41:05 - [warn] [function:SYSTEM VALUES] System Startup Initiated...

1 Aug 18:41:05 - [info] Server now running at https://127.0.0.1:1880/node-red/

Re: IoT Controller's Node-red port

Vineet_nejwala — Tue, 02 Aug 2022 10:01:59 GMT

Hi @nets

My bad for confusion, that was my controller IP for you it should be yours, 127.0.0.1 will work as it is loop back IP. Let me correct my statement above for no confusion and you can add your controller IP rather than loop back.

Best Regards

Vineet