topic Re: Help with 7372 access point setup for Mac in FlexMaster

Help with 7372 access point setup for Mac

hadleigh_o_neil — Mon, 19 Jan 2015 19:43:46 GMT

Im using a Mac and struggling to follow the setup guide provided for the 7372 access point as it is for windows could some help?

Re: Help with 7372 access point setup for Mac

munish_munish — Tue, 20 Jan 2015 08:14:26 GMT

Hi Hadleigh O'Neill,

If i am not wrong , you want to access the AP with Mac. It is simple as windows.

First You need to change the IP address of your Mac .

Select Use the following IP address
• IP address: 192.168.0.22 (or any address in the 192.168.0.x network)
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.0.1
Leave the DNS server fields empty.

LOG INTO THE AP
The AP should be directly connected to your
computer (through the Ethernet port) and powered on, ready for
setup.
1 On your computer, open a Web browser window.
2 In the browser, type this URL to connect to the AP:
https://192.168.0.1
3 Press to initiate the connection. When a security
alert dialog box appears, click OK/Yes to proceed.
4 When the Ruckus Wireless Admin login page appears, enter
the following:
• Username: super
• Password: sp-admin

Let me know if this helps.

Thanks

Re: Help with 7372 access point setup for Mac

blair_neal_7165 — Tue, 07 Apr 2015 14:54:02 GMT

I've tried this with a new/out of the box 7982 that was given to us a demo device. I have been trying to do set up on a mac. I have followed the above directions in the Network system prefs.

I've gotten all the way past the security flags and I'm at the login page, but on page load it shows "Your session timed out. Please login again." before I've even entered anything. When I do enter the default login/password the page just blinks and shows that same message at the top and nothing is loaded properly - despite multiple tries. It does this in both Safari and Chrome. Is there something I need to enable in my browser to get past this?

Re: Help with 7372 access point setup for Mac

blair_neal_7165 — Tue, 07 Apr 2015 15:19:10 GMT

Hmm...guess this wasn't a new out of the box demo unit, hah

I factory reset it, and it ended up working properly after that...good to know

Re: Help with 7372 access point setup for Mac

munish_munish — Tue, 07 Apr 2015 18:00:11 GMT

Good Job Blair , Glad to hear that