topic Re: Flex Master 9.6.0.0.17 VM in FlexMaster

Flex Master 9.6.0.0.17 VM

mario_alberto_m — Fri, 07 Jun 2013 04:12:27 GMT

I download and install the new Flex Master 9.6.0.0.17 VM after the install finish i can ping the server but when i try to access the WEB interface via IP it just wont load, do i have to start a specific service inside the CentOS ?

Re: Flex Master 9.6.0.0.17 VM

keith_redfield — Fri, 07 Jun 2013 15:21:30 GMT

I'm not a FlexMaster expert (or..an expert), but try

-turning off iptables firewall
-telnet/ssh from your FM shell out to another host (or traceroute..anything to validate IP connectivity).
-Double-check the settings for your guest OS (networking, etc) are exactly as stated in the manual (bridged vs NAT, etc)

Meanwhile I'll see if we can get an actual expert here...

Re: Flex Master 9.6.0.0.17 VM

mario_alberto_m — Sat, 08 Jun 2013 02:43:09 GMT

Hi Keith i did check what you told me and im still having the same issue.

I can ping from the server to my computer, the server and i are in the same local network and same switch.

From my computer y can ping the server.

I try to access via https://ip-address

The server does have internet conectivity, but right now i just need to access it inside my local network

I can SSH to the FlexMaster from my computer.

I disable the firewall inside the CentOS and still have the same issue.

I think i need to start the WEB service but i don't know how to.

Re: Flex Master 9.6.0.0.17 VM

red_cloud — Mon, 10 Jun 2013 13:17:42 GMT

Have you tried with different browsers? Try using Chrome/ Firefox.

- Clear cookies and temp files etc,

Re: Flex Master 9.6.0.0.17 VM

mario_alberto_m — Mon, 10 Jun 2013 15:30:37 GMT

Yes i try.

Re: Flex Master 9.6.0.0.17 VM

sid_sok — Mon, 10 Jun 2013 16:44:47 GMT

If you have turned the firewall off (# service iptables stop) and you verify FlexMaster is running (# ps -aux) and look for FlexMaster services, try using the full url:

http://[server ip]/intune

If you have any doubt that FM service is not running navigate to the FM directory (/opt/FlexMaster) and issue a restart ([root@localhost FlexMaster]# ./restart.sh)

Re: Flex Master 9.6.0.0.17 VM

justin_mcnair — Tue, 11 Jun 2013 13:38:15 GMT

Is apache running?

Re: Flex Master 9.6.0.0.17 VM

keith_redfield — Wed, 12 Jun 2013 00:28:58 GMT

We're working this in our lab. When installing FlexMaster on to an existing Redhat or Centos installation, it's normal to have to fiddle with iptables and such. But when we're providing the OS, it should already be set. Should have an answer soon.

Re: Flex Master 9.6.0.0.17 VM

mario_alberto_m — Wed, 12 Jun 2013 01:41:19 GMT

Hi whit ps -aux i get this

when i restart the flexmaster service i get this output

and for the apache i get this

I re-install the FlexMaster and still the same issue, i think im missing something in the configuration here, how can i run the configuration process ? When i install on a clean CentOS i enter the command ./install.sh to install FlexMaster and the install process will ask me for password, http port, mysql password, smtp, etc etc.. but when i install the Flex Master 9.6.0.0.17 VM i don ́t get that prompt asking for all that information.

Re: Flex Master 9.6.0.0.17 VM

kaurat_pun — Thu, 13 Jun 2013 16:16:33 GMT

Did you check your /etc/hosts on the client to look any forgotten temporary setting? or try code $/>telnet 192.168.2.4 http or go to http://www.versatek.com/power-over-et... or on your server check DNS logs, on your client when you run $ host www.collins.net, when run this it say 192.168.2.23 the only LAN IP from which you are unable to connect to your server? If so then check its /etc/resolv.conf and /etc/hosts files. Thanks.

Re: Flex Master 9.6.0.0.17 VM

ana_cucala — Wed, 04 Dec 2013 18:43:05 GMT

Hi!
I have the same problem. Finally, did you solve it? How?
Thank you,